Menu
▾
▴
Re: [tpmdd-devel] [PATCH] MMIO Infineon TPM 1.1 support
|
From: Alex W. <ale...@hp...> - 2007-03-06 18:13:22
|
On Tue, 2007-03-06 at 18:53 +0100, Marcel Selhorst wrote:
> Hi Alex, hi Kylie,
>
> thanks for the patch. I haven't had the time to test it, yet, but since Matthew
> mentioned, that the MMIO-part is working, I will verify the functionality of the
> "legacy" IO tomorrow (although I think, that it should work fine).
>
> Just one comment, could you also modify the driver-version, so that I can keep track
> of it with my SVN?
>
> As soon as I verified, that it is still working, you can send it to LKML tomorrow.
Attached below is a new version of the patch that bumps the driver
version from 1.8 to 1.9. Thanks,
Alex
Signed-off-by: Alex Williamson <ale...@hp...>
---
diff -r c8e6d6d04971 -r 5e0fb1be86e6 drivers/char/tpm/tpm_infineon.c
--- a/drivers/char/tpm/tpm_infineon.c Thu Feb 15 16:08:36 2007 -0700
+++ b/drivers/char/tpm/tpm_infineon.c Tue Mar 06 10:44:06 2007 -0700
@@ -30,12 +30,60 @@
#define TPM_MAX_TRIES 5000
#define TPM_INFINEON_DEV_VEN_VALUE 0x15D1
-/* These values will be filled after PnP-call */
-static int TPM_INF_DATA;
-static int TPM_INF_ADDR;
-static int TPM_INF_BASE;
-static int TPM_INF_ADDR_LEN;
-static int TPM_INF_PORT_LEN;
+#define TPM_INF_IO_PORT 0x0
+#define TPM_INF_IO_MEM 0x1
+
+#define TPM_INF_ADDR 0x0
+#define TPM_INF_DATA 0x1
+
+struct tpm_inf_dev {
+ int iotype;
+
+ void __iomem *mem_base; /* MMIO ioremap'd addr */
+ unsigned long map_base; /* phys MMIO base */
+ unsigned long map_size; /* MMIO region size */
+ unsigned int index_off; /* index register offset */
+
+ unsigned int data_regs; /* Data registers */
+ unsigned int data_size;
+
+ unsigned int config_port; /* IO Port config index reg */
+ unsigned int config_size;
+};
+
+static struct tpm_inf_dev tpm_dev;
+
+static inline void tpm_data_out(unsigned char data, unsigned char offset)
+{
+ if (tpm_dev.iotype == TPM_INF_IO_PORT)
+ outb(data, tpm_dev.data_regs + offset);
+ else
+ writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
+}
+
+static inline unsigned char tpm_data_in(unsigned char offset)
+{
+ if (tpm_dev.iotype == TPM_INF_IO_PORT)
+ return inb(tpm_dev.data_regs + offset);
+ else
+ return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
+}
+
+static inline void tpm_config_out(unsigned char data, unsigned char offset)
+{
+ if (tpm_dev.iotype == TPM_INF_IO_PORT)
+ outb(data, tpm_dev.config_port + offset);
+ else
+ writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
+}
+
+static inline unsigned char tpm_config_in(unsigned char offset)
+{
+ if (tpm_dev.iotype == TPM_INF_IO_PORT)
+ return inb(tpm_dev.config_port + offset);
+ else
+ return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
+}
/* TPM header definitions */
enum infineon_tpm_header {
@@ -105,7 +153,7 @@ static int empty_fifo(struct tpm_chip *c
if (clear_wrfifo) {
for (i = 0; i < 4096; i++) {
- status = inb(chip->vendor.base + WRFIFO);
+ status = tpm_data_in(WRFIFO);
if (status == 0xff) {
if (check == 5)
break;
@@ -125,8 +173,8 @@ static int empty_fifo(struct tpm_chip *c
*/
i = 0;
do {
- status = inb(chip->vendor.base + RDFIFO);
- status = inb(chip->vendor.base + STAT);
+ status = tpm_data_in(RDFIFO);
+ status = tpm_data_in(STAT);
i++;
if (i == TPM_MAX_TRIES)
return -EIO;
@@ -139,7 +187,7 @@ static int wait(struct tpm_chip *chip, i
int status;
int i;
for (i = 0; i < TPM_MAX_TRIES; i++) {
- status = inb(chip->vendor.base + STAT);
+ status = tpm_data_in(STAT);
/* check the status-register if wait_for_bit is set */
if (status & 1 << wait_for_bit)
break;
@@ -158,7 +206,7 @@ static void wait_and_send(struct tpm_chi
static void wait_and_send(struct tpm_chip *chip, u8 sendbyte)
{
wait(chip, STAT_XFE);
- outb(sendbyte, chip->vendor.base + WRFIFO);
+ tpm_data_out(sendbyte, WRFIFO);
}
/* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more
@@ -205,7 +253,7 @@ recv_begin:
ret = wait(chip, STAT_RDA);
if (ret)
return -EIO;
- buf[i] = inb(chip->vendor.base + RDFIFO);
+ buf[i] = tpm_data_in(RDFIFO);
}
if (buf[0] != TPM_VL_VER) {
@@ -220,7 +268,7 @@ recv_begin:
for (i = 0; i < size; i++) {
wait(chip, STAT_RDA);
- buf[i] = inb(chip->vendor.base + RDFIFO);
+ buf[i] = tpm_data_in(RDFIFO);
}
if ((size == 0x6D00) && (buf[1] == 0x80)) {
@@ -269,7 +317,7 @@ static int tpm_inf_send(struct tpm_chip
u8 count_high, count_low, count_4, count_3, count_2, count_1;
/* Disabling Reset, LP and IRQC */
- outb(RESET_LP_IRQC_DISABLE, chip->vendor.base + CMD);
+ tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
ret = empty_fifo(chip, 1);
if (ret) {
@@ -320,7 +368,7 @@ static void tpm_inf_cancel(struct tpm_ch
static u8 tpm_inf_status(struct tpm_chip *chip)
{
- return inb(chip->vendor.base + STAT);
+ return tpm_data_in(STAT);
}
static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
@@ -381,51 +429,86 @@ static int __devinit tpm_inf_pnp_probe(s
/* read IO-ports through PnP */
if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
!(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
- TPM_INF_ADDR = pnp_port_start(dev, 0);
- TPM_INF_ADDR_LEN = pnp_port_len(dev, 0);
- TPM_INF_DATA = (TPM_INF_ADDR + 1);
- TPM_INF_BASE = pnp_port_start(dev, 1);
- TPM_INF_PORT_LEN = pnp_port_len(dev, 1);
- if ((TPM_INF_PORT_LEN < 4) || (TPM_INF_ADDR_LEN < 2)) {
+
+ tpm_dev.iotype = TPM_INF_IO_PORT;
+
+ tpm_dev.config_port = pnp_port_start(dev, 0);
+ tpm_dev.config_size = pnp_port_len(dev, 0);
+ tpm_dev.data_regs = pnp_port_start(dev, 1);
+ tpm_dev.data_size = pnp_port_len(dev, 1);
+ if ((tpm_dev.data_size < 4) || (tpm_dev.config_size < 2)) {
rc = -EINVAL;
goto err_last;
}
dev_info(&dev->dev, "Found %s with ID %s\n",
dev->name, dev_id->id);
- if (!((TPM_INF_BASE >> 8) & 0xff)) {
+ if (!((tpm_dev.data_regs >> 8) & 0xff)) {
rc = -EINVAL;
goto err_last;
}
/* publish my base address and request region */
- if (request_region
- (TPM_INF_BASE, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
+ if (request_region(tpm_dev.data_regs, tpm_dev.data_size,
+ "tpm_infineon0") == NULL) {
rc = -EINVAL;
goto err_last;
}
- if (request_region
- (TPM_INF_ADDR, TPM_INF_ADDR_LEN, "tpm_infineon0") == NULL) {
+ if (request_region(tpm_dev.config_port, tpm_dev.config_size,
+ "tpm_infineon0") == NULL) {
rc = -EINVAL;
goto err_last;
}
+ } else if (pnp_mem_valid(dev, 0) &&
+ !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {
+
+ tpm_dev.iotype = TPM_INF_IO_MEM;
+
+ tpm_dev.map_base = pnp_mem_start(dev, 0);
+ tpm_dev.map_size = pnp_mem_len(dev, 0);
+
+ dev_info(&dev->dev, "Found %s with ID %s\n",
+ dev->name, dev_id->id);
+
+ /* publish my base address and request region */
+ if (request_mem_region(tpm_dev.map_base, tpm_dev.map_size,
+ "tpm_infineon0") == NULL) {
+ rc = -EINVAL;
+ goto err_last;
+ }
+
+ tpm_dev.mem_base = ioremap(tpm_dev.map_base, tpm_dev.map_size);
+ if (tpm_dev.mem_base == NULL) {
+ rc = -EINVAL;
+ goto err_last;
+ }
+
+ /*
+ * The only known MMIO based Infineon TPM system provides
+ * a single large mem region with the device config
+ * registers at the default TPM_ADDR. The data registers
+ * seem like they could be placed anywhere within the MMIO
+ * region, but lets just put them at zero offset.
+ */
+ tpm_dev.index_off = TPM_ADDR;
+ tpm_dev.data_regs = 0x0;
} else {
rc = -EINVAL;
goto err_last;
}
/* query chip for its vendor, its version number a.s.o. */
- outb(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
- outb(IDVENL, TPM_INF_ADDR);
- vendorid[1] = inb(TPM_INF_DATA);
- outb(IDVENH, TPM_INF_ADDR);
- vendorid[0] = inb(TPM_INF_DATA);
- outb(IDPDL, TPM_INF_ADDR);
- productid[1] = inb(TPM_INF_DATA);
- outb(IDPDH, TPM_INF_ADDR);
- productid[0] = inb(TPM_INF_DATA);
- outb(CHIP_ID1, TPM_INF_ADDR);
- version[1] = inb(TPM_INF_DATA);
- outb(CHIP_ID2, TPM_INF_ADDR);
- version[0] = inb(TPM_INF_DATA);
+ tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+ tpm_config_out(IDVENL, TPM_INF_ADDR);
+ vendorid[1] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(IDVENH, TPM_INF_ADDR);
+ vendorid[0] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(IDPDL, TPM_INF_ADDR);
+ productid[1] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(IDPDH, TPM_INF_ADDR);
+ productid[0] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(CHIP_ID1, TPM_INF_ADDR);
+ version[1] = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(CHIP_ID2, TPM_INF_ADDR);
+ version[0] = tpm_config_in(TPM_INF_DATA);
switch ((productid[0] << 8) | productid[1]) {
case 6:
@@ -442,51 +525,54 @@ static int __devinit tpm_inf_pnp_probe(s
if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
/* configure TPM with IO-ports */
- outb(IOLIMH, TPM_INF_ADDR);
- outb(((TPM_INF_BASE >> 8) & 0xff), TPM_INF_DATA);
- outb(IOLIML, TPM_INF_ADDR);
- outb((TPM_INF_BASE & 0xff), TPM_INF_DATA);
+ tpm_config_out(IOLIMH, TPM_INF_ADDR);
+ tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
+ tpm_config_out(IOLIML, TPM_INF_ADDR);
+ tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
/* control if IO-ports are set correctly */
- outb(IOLIMH, TPM_INF_ADDR);
- ioh = inb(TPM_INF_DATA);
- outb(IOLIML, TPM_INF_ADDR);
- iol = inb(TPM_INF_DATA);
-
- if ((ioh << 8 | iol) != TPM_INF_BASE) {
+ tpm_config_out(IOLIMH, TPM_INF_ADDR);
+ ioh = tpm_config_in(TPM_INF_DATA);
+ tpm_config_out(IOLIML, TPM_INF_ADDR);
+ iol = tpm_config_in(TPM_INF_DATA);
+
+ if ((ioh << 8 | iol) != tpm_dev.data_regs) {
dev_err(&dev->dev,
- "Could not set IO-ports to 0x%x\n",
- TPM_INF_BASE);
+ "Could not set IO-data registers to 0x%x\n",
+ tpm_dev.data_regs);
rc = -EIO;
goto err_release_region;
}
/* activate register */
- outb(TPM_DAR, TPM_INF_ADDR);
- outb(0x01, TPM_INF_DATA);
- outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
+ tpm_config_out(TPM_DAR, TPM_INF_ADDR);
+ tpm_config_out(0x01, TPM_INF_DATA);
+ tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
/* disable RESET, LP and IRQC */
- outb(RESET_LP_IRQC_DISABLE, TPM_INF_BASE + CMD);
+ tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
/* Finally, we're done, print some infos */
dev_info(&dev->dev, "TPM found: "
- "config base 0x%x, "
- "io base 0x%x, "
+ "config base 0x%lx, "
+ "data base 0x%lx, "
"chip version 0x%02x%02x, "
"vendor id 0x%x%x (Infineon), "
"product id 0x%02x%02x"
"%s\n",
- TPM_INF_ADDR,
- TPM_INF_BASE,
+ tpm_dev.iotype == TPM_INF_IO_PORT ?
+ tpm_dev.config_port :
+ tpm_dev.map_base + tpm_dev.index_off,
+ tpm_dev.iotype == TPM_INF_IO_PORT ?
+ tpm_dev.data_regs :
+ tpm_dev.map_base + tpm_dev.data_regs,
version[0], version[1],
vendorid[0], vendorid[1],
productid[0], productid[1], chipname);
- if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) {
+ if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf)))
goto err_release_region;
- }
- chip->vendor.base = TPM_INF_BASE;
+
return 0;
} else {
rc = -ENODEV;
@@ -494,8 +580,13 @@ static int __devinit tpm_inf_pnp_probe(s
}
err_release_region:
- release_region(TPM_INF_BASE, TPM_INF_PORT_LEN);
- release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN);
+ if (tpm_dev.iotype == TPM_INF_IO_PORT) {
+ release_region(tpm_dev.data_regs, tpm_dev.data_size);
+ release_region(tpm_dev.config_port, tpm_dev.config_size);
+ } else {
+ iounmap(tpm_dev.mem_base);
+ release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
+ }
err_last:
return rc;
@@ -506,8 +597,14 @@ static __devexit void tpm_inf_pnp_remove
struct tpm_chip *chip = pnp_get_drvdata(dev);
if (chip) {
- release_region(TPM_INF_BASE, TPM_INF_PORT_LEN);
- release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN);
+ if (tpm_dev.iotype == TPM_INF_IO_PORT) {
+ release_region(tpm_dev.data_regs, tpm_dev.data_size);
+ release_region(tpm_dev.config_port,
+ tpm_dev.config_size);
+ } else {
+ iounmap(tpm_dev.mem_base);
+ release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
+ }
tpm_remove_hardware(chip->dev);
}
}
@@ -539,5 +636,5 @@ module_exit(cleanup_inf);
MODULE_AUTHOR("Marcel Selhorst <sel...@cr...>");
MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
-MODULE_VERSION("1.8");
+MODULE_VERSION("1.9");
MODULE_LICENSE("GPL");
|