Re: [Svxlink-devel] node keeps keying up
Brought to you by:
sm0svx
From: Gunnar W. <sm...@kk...> - 2011-09-21 13:29:31
|
Hi Danny, What squelch type are you using? Default is VOX in the config files? Have a look at the parameter: *SQL_START_DELAY* The squelch start delay is of most use when using VOX squelch. For example, if the transceiver makes a noise when the transmitter is turned off, that might trigger the VOX and cause an infinite loop of squelch open/close transmitter on/off. Specify the number of milliseconds that the squelch should be "deaf" after the transmitter has been turned off. 73 de Gunnar SG3P On 09/21/2011 01:01 PM, Danny Moss wrote: > On 19/09/2011 6:36 PM, Adi Bier wrote: >> Hi Danny, >> >> it's hard to say what's going on there without having more information >> about your configuration. >> I guess it's a problem with your squelch or/and your audio path. Verify >> that you don't have an (audio-)connection from the microphone to the >> speaker enabled. The best way is to test it with a headset. You shouln't >> hear your own voice. >> Otherwise the outgoing audio is triggering the squelch (roger beep at >> the end of each transmission). >> >> 73's de Adi, DL1HRC >> >> On 19.09.2011 10:17, Danny Moss wrote: >>> Hi Everybody, >>> >>> After some trouble compiling and setting up my node again under Debian I >>> now have it up and running but I have a problem with it keying up all >>> the time. >>> >>> If all the modules are turned off and server just sitting there waiting >>> for some body to connect to it all is good. >>> >>> As soon as somebody connects to it or turns on the parrot repeater, >>> voice mail, or echolink modules it will just keep keying up every few >>> seconds as soon as the user has diconnected or the module has been shut >>> down the system will sit there and just do its time announcement on the >>> hour and tell who have voice mail. >>> >>> If some body trys to connect to get there voice mail the thing start >>> keying up which then keys up the repeater and so setting up ping pong >>> syetm that is not usable. >>> >>> If I turn the radios off the and connect to VK7HDM-L using my ipad and >>> echolink app I can see it just keep every few second showing me it is >>> rx from the server but there is no audio from it just shows it is keying up >>> > Hi Adi, > > thank you for your reply Ok I will try the head set thing and see what > happens. > > It is comming from the computer in some was so will check that and see. > > Set up there is Debian 6 the computer does have two sound card in it > one on the main board and another pci card this is the one I am using. > > Svxlink config file is how it came after the compile with just call > signs changed and just a few other tweeks on setting I can email that if > needed. > > Thank you best Regards > Danny Moss > VK7HDM > > Node VK7HDM-L > > > The way it is at the moment it is almost not usable > > ------------------------------------------------------------------------------ > All the data continuously generated in your IT infrastructure contains a > definitive record of customers, application performance, security > threats, fraudulent activity and more. Splunk takes this data and makes > sense of it. Business sense. IT sense. Common sense. > http://p.sf.net/sfu/splunk-d2dcopy1 > _______________________________________________ > Svxlink-devel mailing list > Svx...@li... > https://lists.sourceforge.net/lists/listinfo/svxlink-devel |