Re: [Svxlink-devel] node keeps keying up
Brought to you by:
sm0svx
From: Danny M. <dd...@dd...> - 2011-09-21 11:02:45
|
On 19/09/2011 6:36 PM, Adi Bier wrote: > Hi Danny, > > it's hard to say what's going on there without having more information > about your configuration. > I guess it's a problem with your squelch or/and your audio path. Verify > that you don't have an (audio-)connection from the microphone to the > speaker enabled. The best way is to test it with a headset. You shouln't > hear your own voice. > Otherwise the outgoing audio is triggering the squelch (roger beep at > the end of each transmission). > > 73's de Adi, DL1HRC > > On 19.09.2011 10:17, Danny Moss wrote: >> Hi Everybody, >> >> After some trouble compiling and setting up my node again under Debian I >> now have it up and running but I have a problem with it keying up all >> the time. >> >> If all the modules are turned off and server just sitting there waiting >> for some body to connect to it all is good. >> >> As soon as somebody connects to it or turns on the parrot repeater, >> voice mail, or echolink modules it will just keep keying up every few >> seconds as soon as the user has diconnected or the module has been shut >> down the system will sit there and just do its time announcement on the >> hour and tell who have voice mail. >> >> If some body trys to connect to get there voice mail the thing start >> keying up which then keys up the repeater and so setting up ping pong >> syetm that is not usable. >> >> If I turn the radios off the and connect to VK7HDM-L using my ipad and >> echolink app I can see it just keep every few second showing me it is >> rx from the server but there is no audio from it just shows it is keying up >> Hi Adi, thank you for your reply Ok I will try the head set thing and see what happens. It is comming from the computer in some was so will check that and see. Set up there is Debian 6 the computer does have two sound card in it one on the main board and another pci card this is the one I am using. Svxlink config file is how it came after the compile with just call signs changed and just a few other tweeks on setting I can email that if needed. Thank you best Regards Danny Moss VK7HDM Node VK7HDM-L The way it is at the moment it is almost not usable |