Re: [Svxlink-devel] conferencing in svxlink - help
Brought to you by:
sm0svx
From: Tobias B. <sm...@us...> - 2009-11-23 21:19:19
|
On Monday 02 November 2009 09:26:37 Slav Mit wrote: > Dear svxlink-devel-owner > sorry to disturb you, but I was trying to ask a question about the svxlink > and I am registered in the sourceforge, anyway, my e-mail was rejected > Could you please just redirect my email to the developer's community or > someone who could help? here is my e-mail I was trying to send: First, sorry for the long delay... You have to register on the mailing list, not just on SourceForge. You also have to use the address you registered as your "from" address. Kind of obvious maybe... > Hello, everyone. > I am Slav, UA3QGN, from Russia. Using svxlink in my echolink link ( > UA3QGN-L), node 366605 One problem, which I tryed to solve, but need help, > I am afraid: > the config for ModuleEcholink.conf include: MaxQSO=1, MaxConnections=1. > Anyway, when I connected to another link or conference, I am still not > "busy" in the Echolink list of stations! The trouble is that many > repeaters or conferences deny connection to stations which allow > conferencing, i.e. multy connections. So my question: > How to make my link "busy" when someone is connected? so many repeaters > would not disconnect me immedeately after I connect. Any help or tips > would be appreciated I'm afraid that SvxLink does not set the BUSY flag because I didn't know how to use it but your example make this quite obvious. If you want this fixed, please enter an item into the issue tracker. You need to log in to the SourceForge site before the link below start working. https://sourceforge.net/apps/trac/svxlink/newticket 73's de SM0SVX / Tobias > Slav > UA3QGN > Russia. > |