From: Xavier B. <ber...@ya...> - 2013-06-26 21:58:10
|
Hi WD, I just see that it exist a value steergain in xml definition. So I will try to play this Cheers Xavier Le 26/06/2013 23:52, Xavier Bertaux a écrit : > Hi Wolf-Dieter, > > I will try to added a new value to xml for multiply steegain by these > value so for each track these value can be changed for test. > > Cheers > Xavier > > Le 25/06/2013 17:08, Wolf-Dieter Beelitz a écrit : >> Hello Xavier, >> >> just watched the USR at Aalborg. >> >> What I see is: >> >> The car starts to steer into the curve much too early and drives against the inner barrier again and again. After some research in the USR code I identified the steergain value to be used to scale steering. >> >> In line 2061 of USR raceline.cpp the variable k1999steer is calculated using steergain. >> If I scale steergain down >> >> steergain *= 0.06; >> >> the car steers close to the inner barrier. >> >> It still hits the outer barrier, but this is caused by the acceleration issue out of slow turns, like simplix has it. >> >> This steering issue should be the reason for the damaging of opponents driving at the inner side as well. >> >> AFAICS the calculation of steergain has to be reworked completely to work correctly at all speed and all tracks. >> >> Cheers >> >> Wolf-Dieter >> >> > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Speed-dreams-devel mailing list > Spe...@li... > https://lists.sourceforge.net/lists/listinfo/speed-dreams-devel |