[smartmontools-support] 3Ware 7006-2 Support?

[Justin P. <jp...@lu...>]

I just moved from SW RAID1 to HW RAID1 on a 3Ware 7006-2 on Kernel 2.6.16.20.

Smart does not work like it is documented:

p34:~# cat /etc/smartd.conf|grep 3ware
# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
#/dev/sdc -d 3ware,0 -a -s L/../../7/01
#/dev/sdc -d 3ware,1 -a -s L/../../7/02
#/dev/sdc -d 3ware,2 -a -s L/../../7/03
#/dev/sdc -d 3ware,3 -a -s L/../../7/04
p34:~# smartctl -d 3ware,0 -a /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   1
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Jun  7 17:59:30 2006 EDT
SMART is only available in ATA Version 3 Revision 3 or greater.
We will try to proceed in spite of this.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if 
SMART supported.
A mandatory SMART command failed: exiting. To continue, add one or more '-T 
permissive' options.
p34:~#

p34:~# smartctl -d 3ware,0 -a /dev/sda -T permissive
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   1
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Jun  7 17:59:38 2006 EDT
SMART is only available in ATA Version 3 Revision 3 or greater.
We will try to proceed in spite of this.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if 
SMART supported.
                   Checking for SMART support by trying SMART ENABLE command.
                   SMART ENABLE appeared to work!  Continuing.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if 
SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T 
permissive' options.
p34:~#

p34:~# dmesg |tail -n 5
[4295726.321000] 3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update 
your 3ware tools.
[4295734.343000] program smartctl is using a deprecated SCSI ioctl, please 
convert it to SG_IO
[4295734.343000] 3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update 
your 3ware tools.
[4295734.353000] program smartctl is using a deprecated SCSI ioctl, please 
convert it to SG_IO
[4295734.353000] 3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update 
your 3ware tools.
p34:~#

hda: ST3400832A, ATA DISK drive

I have 5 of these disks, two of which are on the 3ware card, all of which 
support all aspects of SMART, any ideas?