From: Daniel B. <da...@me...> - 2005-07-21 14:43:31
|
Hello all. My system has the following specs: OS: Ubuntu "Hoary Hedgehog" release CPUs: Dual Athlon Opteron 246s RAID Controller: 3ware 9500S-8 HDs: 4 - Maxtor MaxLine III 250GB model no. 7L250S0 (logical disk space ~698.46 GB) The 5.32 packaged version of smartmontools in the ubuntu archives did not work at all so I made my own deb of a CVS snapshot that I took on 2005-07-19. I compiled this with the same compiler that my glibc was built with. Smartd gives me the following 2 warnings for each drive: Jul 21 08:53:20 localhost smartd[4424]: Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. Jul 21 08:53:20 localhost smartd[4424]: Warning! SMART ATA Error Log Structure error: invalid SMART checksum. Is this something to be worried about? Will smartd be able to monitor my drives correctly? Dan Detailed output from running smartctl from the command is shown below or you can visit http://pastebin.com/317792. danielb@corporate2:~$ sudo smartctl -a -d 3ware,0 /dev/twa0 smartctl version 5.34 [x86_64-unknown-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: Maxtor 7L250S0 Serial Number: L5063MQH Firmware Version: BANC1E00 User Capacity: 251,000,193,024 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Thu Jul 21 09:28:16 2005 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1922) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 99) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED R AW_VALUE 3 Spin_Up_Time 0x0027 188 188 063 Pre-fail Always - 5 613 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 2 1 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 247 240 187 Pre-fail Always - 6 0802 9 Power_On_Hours 0x0032 252 252 000 Old_age Always - 2 3897 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always - 2 3 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 034 253 000 Old_age Always - 3 1 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 1 5726 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0 202 TA_Increase_Count 0x000a 253 251 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0 204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 239 239 000 Old_age Offline - 1 77 210 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0 211 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0 212 Unknown_Attribute 0x0032 253 252 000 Old_age Always - 0 Warning! SMART ATA Error Log Structure error: invalid SMART checksum. SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_firs t_error # 1 Short offline Completed without error 00% 390 - # 2 Short offline Completed without error 00% 388 - # 3 Extended offline Aborted by host 40% 388 - # 4 Extended offline Aborted by host 70% 388 - # 5 Short offline Completed without error 00% 388 - # 6 Offline Aborted by host 70% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. |