Re: [Smartmontools-support]IBM scsi drives error 56?

[Bruce A. <ba...@gr...>]

Hi Harald,

Thanks very much for sending the information.  Doug, I think that I can
now answer your question, about method == CHECK_SMART_BY_LGPG_2F.

I think that this conditional is true.  The reason is that since Harald's
disk supports page 0x2f, then the switch statement:

         case SMART_PAGE:
            gSmartPage = 1;
            break;

gets executed.  Since gSmartPage==1 is the second ("method") argument to
scsiCheckSmart(), and since CHECK_SMART_BY_LGPG_2F==0x01, the conditional
should be true.  And I guess it makes sense, since LGPG_2F clearly means
"log page 2F" which is the SMART log page.

[I hope that this helps!]

Cheers,
	Bruce

On Mon, 17 Feb 2003, Harald Hannelius wrote:

> 
> On Sun, 16 Feb 2003, Bruce Allen wrote:
> 
> > > 'sg_logs -a /dev/sg0'.
> >
> > Harald, could you please do this?
> 
> Here we go:
> Output from sg_logs -a /dev/sg1
> 
> (clipped out long hexdump, can provide that over http if needed)
> 
> Supported pages:
>     0x00    Supported log pages
>     0x02    Error counters (write)
>     0x03    Error counters (read)
>     0x05    Error counters (verify)
>     0x06    Non-medium errors
>     0x0d    Temperature
>     0x0e    Start-stop cycle counter
>     0x0f    Application client
>     0x10    Self-test results
>     0x2f    Informational exceptions (SMART)
> 
> Write error counter page
>   Errors corrected without substantion delay = 0
>   Errors corrected with possible delays = 0
>   Total operations = 0
>   Total errors corrected = 0
>   Total times correction algorithm processed = 0
>   Total bytes processed = 221622060032
>   Total uncorrected errors = 0
> 
> Read error counter page
>   Errors corrected without substantion delay = 0
>   Errors corrected with possible delays = 0
>   Total operations = 0
>   Total errors corrected = 0
>   Total times correction algorithm processed = 0
>   Total bytes processed = 119896355840
>   Total uncorrected errors = 0
> 
> Verify error counter page
>   Errors corrected without substantion delay = 0
>   Errors corrected with possible delays = 0
>   Total operations = 0
>   Total errors corrected = 0
>   Total times correction algorithm processed = 0
>   Total bytes processed = 0
>   Total uncorrected errors = 0
> 
> Non-medium error page
>   Non-medium error count = 0
> 
> Temperature page
>   Current temperature= 31 C
>   Reference temperature= 85 C
> 
> Start-stop cycle counter page
>   Date of manufacture, year: 2000, week: 48
>   Accounting date, year:     , week:
>   Specified cycle count over device lifetime=10000
>   Accumulated start-stop cycles=142
> 
> No ascii information for page=0xf, here is hex:
>  00     0f 00 40 00 00 00 83 fc  00 00 00 00 00 00 00 00
>  10     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
> ...
> [some 1000 lines of hex clipped out by harald]
> ...
>  4000   00 00 00 00
> 
> Self-test results page
> 
> No ascii information for page=0x2f, here is hex:
>  00     2f 00 00 08 00 00 00 04  5d 56 1f 55
> 
> -- 
> A: Top Posters
> Q: What is the most annoying thing on mailing lists?
> 
> Harald H Hannelius | harald/a\arcada.fi      | GSM +358 50 594 1020 (NEW)
>