From: Christian F. <Chr...@t-...> - 2013-10-10 21:40:21
|
Теневод Ужасный wrote: > I'm about to configure a RAID1 on a Marvell 91xx Controller (Board: > Gigabyte Z68X-UD4-B3) and try to establish some kind of health status > and temperature monitoring based on smartctl running on Win7 x64. > > smartctl -i /dev/sda gives me information about the Marvell VD with no > SMART capability.. OK. This is as expected. > I found out that -d sat,12 option gives me access to the SMART of the > physical drive(s), Interesting. This is the first report of a Windows (S)ATA controller driver which supports SAT. Please provide a sample smartctl -x output. Does -d sat[,16] work? > but here is a problem regardless of what I type in to > identify the device (/dev/sda- dev/sda,0 - dev/sda,1 or even > /dev/sda,10) i only get the information for the disk on physical port 0 > and have no chance to get to the second one. The notation /dev/sdX,PORT is only supported for 3ware controllers. > Isthere a possibility to get through to the second drive, or is it > planned to implement support for this controller? I'm not aware of functionality to address physical drives via this controller's Windows driver. Please check whether CSMI is implemented: smartctl -r ioctl,2 -d csmi --scan Thanks, Christian |