Menu
▾
▴
Re: [smartmontools-support] 3ware 9750-16i4e issue
|
From: Jay L. <dan...@gm...> - 2012-07-27 19:07:27
|
Thanks, I tried all 16 addresses but no luck. twl0 - Input/output error twl1-15 - No such device Also tried tw-cli tool (deb package from http://hwraid.le-vert.net/) Regards Jay ======================================== root@localhost:~# smartctl -d 3ware,1 -a /dev/twl0 smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-3-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Smartctl: Device Read Identity Failed: Input/output error A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. root@localhost:~# smartctl -d 3ware,1 -a /dev/twl1 smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-3-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Smartctl open device: /dev/twl1 [3ware_disk_01] failed: No such device root@localhost:~# smartctl -d 3ware,1 -a /dev/twl2 smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-3-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Smartctl open device: /dev/twl2 [3ware_disk_01] failed: No such device root@localhost:~# smartctl -d 3ware,1 -a /dev/twl3 smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-3-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Smartctl open device: /dev/twl3 [3ware_disk_01] failed: No such device root@localhost:~# tw-cli info c0 Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-1 OK - - - 931.312 Ri ON u1 SINGLE OK - - - 558.783 Ri ON u2 SINGLE OK - - - 558.783 Ri ON u3 SINGLE OK - - - 558.783 Ri ON u4 SINGLE OK - - - 558.783 Ri ON u5 SINGLE OK - - - 558.783 Ri ON u6 SINGLE OK - - - 558.783 Ri ON u7 SINGLE OK - - - 558.783 Ri ON u8 SINGLE OK - - - 558.783 Ri ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p4 OK u1 558.91 GB SAS 4 - SEAGATE ST3600057SS p5 OK u2 558.91 GB SAS 5 - SEAGATE ST3600057SS p8 OK u3 558.91 GB SAS 8 - SEAGATE ST3600057SS p9 OK u4 558.91 GB SAS 9 - SEAGATE ST3600057SS p10 OK u5 558.91 GB SAS 10 - SEAGATE ST3600057SS p11 OK u6 558.91 GB SAS 11 - SEAGATE ST3600057SS p12 OK u0 931.51 GB SATA 12 - ST1000DM003-9YN162 p13 OK u0 931.51 GB SATA 13 - ST1000DM003-9YN162 p14 OK u7 558.91 GB SAS 14 - SEAGATE ST3600057SS p15 OK u8 558.91 GB SAS 15 - SEAGATE ST3600057SS ======================================== On Fri, Jul 27, 2012 at 8:16 PM, Justin Piszcz <jp...@lu...> wrote: > > -----Original Message----- > From: Jay Lee [mailto:dan...@gm...] > Sent: Thursday, July 26, 2012 7:23 PM > To: sma...@li... > Subject: [smartmontools-support] 3ware 9750-16i4e issue > > Hi > > I've a 3ware 9750-16i4e RAID card with below configuration. > > OS: Debian wheezy > Kernel: 3.2.0-3-amd64 > Smartmontools version: 5.41+svn3365-1 > > Raid configuration: > RAID1 - 2 x SATA disks > Single disk(no raid) - 8 x SAS disks > > -- > > Hi, > > I have a 9750-24i4e but all disks are SATA, also running Debian Wheezy. > > # smartctl -d 3ware,1 -a /dev/twl0 |more > smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.4.0] (local build) > Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > (etc..) > > There may be an issue running SATA vs. SAS but before we go down that route, > have you tried all 16 addreses? > e.g., ,0 to ,15? > > Show tw_cli info c0? > > Justin. > |