Menu
▾
▴
[Smartmontools-database] WD 3TB Green Power Advanced Format disk not in the database
|
From: Merle R. <mer...@ma...> - 2010-12-19 15:40:14
|
This is the new Western Digital 3TB Green Power Advanced Format disk. Nothing special in the way of vendor-specific display options were used with the drive and as far as I can tell, all the Attributes are behaving as other drives in the green power family. This disk is hooked to a Mac so no special adapters or drivers were utilized. Merle smartctl 5.40 2010-10-16 r3189 [x86_64-apple-darwin10.4.2] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD30EZRS-00J99B0 Serial Number: WD-WMAWZ0024729 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Dec 19 10:35:31 2010 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (50460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 4 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1046 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 37 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 3252 194 Temperature_Celsius 0x0022 114 113 000 Old_age Always - 38 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1046 - # 2 Extended offline Completed without error 00% 1046 - # 3 Short offline Completed without error 00% 1014 - # 4 Short offline Completed without error 00% 990 - # 5 Short offline Completed without error 00% 966 - # 6 Short offline Completed without error 00% 942 - # 7 Short offline Completed without error 00% 918 - # 8 Short offline Completed without error 00% 894 - # 9 Extended offline Completed without error 00% 878 - #10 Extended offline Completed without error 00% 397 - #11 Short offline Completed without error 00% 295 - #12 Short offline Completed without error 00% 271 - #13 Short offline Completed without error 00% 247 - #14 Short offline Completed without error 00% 223 - #15 Extended offline Completed without error 00% 208 - #16 Short offline Completed without error 00% 175 - #17 Short offline Completed without error 00% 151 - #18 Short offline Completed without error 00% 128 - #19 Short offline Completed without error 00% 104 - #20 Short offline Completed without error 00% 80 - #21 Short offline Completed without error 00% 56 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. |