Re: [smartmontools-support] Can not enable smartd support

[Justin P. <jp...@lu...>]

Hi,

According to this it should work:
http://serverfault.com/questions/171748/using-smartctl-to-get-vendor-specific-attributes-from-ssd-drive-behind-a-smartarr

Try:
smartctl -d cciss,0 -a /dev/cciss/c0d0
smartctl -d cciss,1 -a /dev/cciss/c0d0


Do not use '-s on'

Justin.

On Fri, 10 Dec 2010, bruce wrote:

> HI , Justin
>
> My controller is P410
>
> [root@localhost bin]# hpacucli ctrl all show
>
> Smart Array P410 in Slot 1 (sn: PACCR9VYBIEK )
>
>
>
> ? 2010-12-10 18:46, Justin Piszcz ??:
>> Hi,
>> 
>> What type of controller?
>> hpacucli ctrl all show
>> 
>> Justin.
>> 
>> On Fri, 10 Dec 2010, bruce wrote:
>> 
>>> Hi , Justin
>>> 
>>> I have Installed the smartmontools 5.40 from the source tarball, but when 
>>> I
>>> run the command smartctl to enable smartd support , there is already that
>>> error:
>>> 
>>> 
>>> [root@localhost bin]# smartctl -s on -d cciss,0 -a /dev/cciss/c0d0
>>> smartctl 5.40 2010-10-16 r3189 [x86_64-unknown-linux-gnu] (local build)
>>> Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
>>> 
>>> Serial number:
>>> Device type: disk
>>> Local Time is: Thu Dec 9 21:34:20 2010 EST
>>> Device supports SMART and is Disabled
>>> Temperature Warning Disabled or Not Supported
>>> Informational Exceptions (SMART) disabled
>>> Temperature warning disabled
>>> Log Sense failed, IE page [scsi response fails sanity test]
>>> Read defect list: asked for grown list but didn't get it
>>> 
>>> Error Counter logging not supported
>>> Device does not support Self Test logging
>>> 
>>> 
>>> 
>>> ? 2010-12-9 18:47, Justin Piszcz ??:
>>>> Hi,
>>>> 
>>>> What happens when you use smartmontools 5.40?
>>>> 
>>>> Justin.
>>>> 
>>>> On Thu, 9 Dec 2010, bruce wrote:
>>>> 
>>>>> HI ,
>>>>> 
>>>>> please help me ,when I use smartctl command to enable the smart
>>>>> support,there is a error:
>>>>> 
>>>>> My server isHP ProLiant /DL180 G6/ , Smart Array P410 ,a raid 5 build by
>>>>> eight 2TB sata device! OS is centos 5.5, kernel is 2.6.18-194.el5.
>>>>> 
>>>>> 
>>>>> [root@localhost ~]# smartctl -s on -d cciss,0 -a /dev/cciss/c0d0
>>>>> smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8
>>>>> Bruce Allen
>>>>> Home page is http://smartmontools.sourceforge.net/
>>>>> 
>>>>> Serial number: S2H7JD1Z905255
>>>>> Device type: disk
>>>>> Local Time is: Tue Dec 7 22:05:15 2010 EST
>>>>> Device supports SMART and is Disabled
>>>>> Temperature Warning Disabled or Not Supported
>>>>> Informational Exceptions (SMART) disabled
>>>>> Temperature warning disabled
>>>>> Log Sense failed, IE page [scsi response fails sanity test]
>>>>> Read defect list: asked for grown list but didn't get it
>>>>> 
>>>>> Error Counter logging not supported
>>>>> Device does not support Self Test logging
>>>>> 
>>>>> 
>>>>> The smart array driver is installed,
>>>>> 
>>>>> [root@localhost ~]# rpm -qa | grep cpq_cciss
>>>>> cpq_cciss-3.6.26-5
>>>>> 
>>>>> 
>>>>> please help me , Thank you very much!
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>