[Smartmontools-database] ST9120822AS

[Alberto S. <ast...@we...>]

smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce =
Allen
Home page is http://smartmontools.sourceforge.net/

=3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D
Device Model:     ST9120822AS
Serial Number:    5LZ1212C
Firmware Version: 3.ALB
User Capacity:    120.034.123.776 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Jul 01 20:59:39 2007 RN
SMART support is: Available - device has SMART capability.
                  Enabled status cached by OS, trying SMART RETURN =
STATUS cmd.
SMART support is: Enabled

=3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine =
completed
					without error or no self-test has ever=20
					been run.
Total time to complete Offline=20
data collection: 		 ( 426) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine=20
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 111) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      =
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail  Always =
      -       0
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always =
      -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always =
      -       21
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always =
      -       0
  7 Seek_Error_Rate         0x000f   063   060   030    Pre-fail  Always =
      -       2074571
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always =
      -       43
 10 Spin_Retry_Count        0x0013   100   100   034    Pre-fail  Always =
      -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always =
      -       19
187 Unknown_Attribute       0x0032   100   100   000    Old_age   Always =
      -       0
189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always =
      -       0
190 Temperature_Celsius     0x0022   055   050   045    Old_age   Always =
      -       807993389
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always =
      -       17
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always =
      -       1264
194 Temperature_Celsius     0x0022   045   050   000    Old_age   Always =
      -       45 (Lifetime Min/Max 0/23)
195 Hardware_ECC_Recovered  0x001a   064   062   000    Old_age   Always =
      -       102512565
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always =
      -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   =
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always =
      -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   =
Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always =
      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  =
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        37     =
    -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute =
delay.