Re: [smartmontools-support] HP Smart Array E200i Controller

[Alex K. <ad...@li...>]

12.07.2010 18:02, ROGERIO DE CARVALHO BASTOS пишет:
> Hi,
>
> I have problems with smartmontools and follow system: Debian Lenny,
> kernel 2.6.26-2-amd64 in a HP Proliant ML350 G5 with HP Smart Array
> E200i Controller and SATA disks.
>
> This is the smartmontools' version: 5.38-2+lenny1
> And thess are the outputs:
>
> ----------------
> # smartctl -d cciss,0 -i /dev/cciss/c0d0
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8
> Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> Serial number: 9QE4XJXJ
> Device type: disk
> Local Time is: Mon Jul 12 10:56:26 2010 BRT
> Device supports SMART and is Enabled
> Temperature Warning Disabled or Not Supported
>
> -------------------
> poseidon:~/smartmontools-install# smartctl -a -r ioctl,1 -d cciss,0
> /dev/cciss/c0d0
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8
> Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
> Serial number: 9QE4XJXJ
> Device type: disk
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
> scsiModePageOffset: response length too short, resp_len=1 offset=12 bd_len=8
> Local Time is: Mon Jul 12 11:01:10 2010 BRT
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
> Device supports SMART and is Enabled
> Temperature Warning Disabled or Not Supported
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
> Log Sense failed, IE page [scsi response fails sanity test]
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
> Read defect list: asked for grown list but didn't get it
>
> Error Counter logging not supported
>     cciss_getlun(3, 0) = 0x0; scsi3addr: 00 00 00 c0 00 00 00 01
>     status=0
> scsiModePageOffset: response length too short, resp_len=1 offset=12 bd_len=8
> Device does not support Self Test logging
>
> --------------------
> Any idea?
>
use 32-bit system.
it's old, not fixed bug amd64/cciss