From: Frieder F. <fri...@we...> - 2010-02-25 09:08:45
|
Hi, Frieder Ferlemann schrieb: > I'm appending the output of smartctl -a after running smartctl -t short /dev/sda Sorry, the attachment didn't stick. Greetings, Frieder ./smartctl -a /dev/sdb smartctl 5.40 2010-02-18 r3069 [x86_64-suse-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: STT_FTM64GX25H Serial Number: P612102-MIBY-208A052 Firmware Version: 1916 User Capacity: 64.023.257.088 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 25 10:03:39 2010 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x1d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 0) minutes. Extended self-test routine recommended polling time: ( 0) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 006 000 000 Old_age Offline - 0 9 Power_On_Hours 0x0000 014 000 000 Old_age Offline - 0 12 Power_Cycle_Count 0x0000 005 000 000 Old_age Offline - 0 184 End-to-End_Error 0x0000 093 000 000 Old_age Offline - 0 195 Hardware_ECC_Recovered 0x0000 000 000 000 Old_age Offline - 0 196 Reallocated_Event_Count 0x0000 000 000 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0000 000 000 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0000 118 097 000 Old_age Offline - 424 199 UDMA_CRC_Error_Count 0x0000 179 236 000 Old_age Offline - 1066 200 Multi_Zone_Error_Rate 0x0000 227 139 000 Old_age Offline - 10 201 Soft_Read_Error_Rate 0x0000 165 193 000 Old_age Offline - 18 202 Data_Address_Mark_Errs 0x0000 126 217 000 Old_age Offline - 0 203 Run_Out_Cancel 0x0000 106 161 000 Old_age Offline - 0 204 Soft_ECC_Correction 0x0000 000 000 000 Old_age Offline - 0 205 Thermal_Asperity_Rate 0x0000 016 039 000 Old_age Offline - 0 206 Flying_Height 0x0000 001 000 000 Old_age Offline - 0 207 Spin_High_Current 0x0000 011 001 000 Old_age Offline - 0 208 Spin_Buzz 0x0000 011 000 000 Old_age Offline - 0 209 Offline_Seek_Performnce 0x0000 100 000 000 Old_age Offline - 0 211 Unknown_Attribute 0x0000 000 000 000 Old_age Offline - 0 212 Unknown_Attribute 0x0000 000 000 000 Old_age Offline - 0 213 Unknown_Attribute 0x0000 000 000 000 Old_age Offline - 0 Warning: device does not support Error Logging Warning! SMART ATA Error Log Structure error: invalid SMART checksum. SMART Error Log Version: 1 No Errors Logged Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging |