From: Jui-Pin Y. <jp...@it...> - 2007-03-22 02:09:58
|
Dear all,=0D I am a newbie to the smartmontool. I would like to completely understand the meaning of the return results of= the smartctl command as follows. Where can I find the related documents about the issue? Many Thanks Best Regards Jui-Pin Yang =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Engineer Network Storage Technology Department Home Network Technology Center ITRI South Industrial Technology Research Institute =0D N300 ITRI Bldg., R1, No.31, Gongye 2nd Rd.,=0D Annan District, Tainan City 709, Taiwan (R.O.C.) Tel: 886-6-3847103 Fax: 886-6-3847182 E-mail: jp...@it... =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce= Allen Home page is http://smartmontools.sourceforge.net/ =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 3JT35095 Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Wed Mar 21 16:32:55 2007=0D SMART support is: Available - device has SMART capability. Disabled status cached by OS, trying SMART RETURN STATUS= cmd. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine= completed without error or no self-test has ever=0D been run. Total time to complete Offline=0D data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine=0D recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED = WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 052 049 006 Pre-fail Always = - 155496913 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always = - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always = - 44 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always = - 5 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always = - 314026131 9 Power_On_Hours 0x0032 073 073 000 Old_age Always = - 24216 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always = - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always = - 278 194 Temperature_Celsius 0x0022 052 059 000 Old_age Always = - 52 195 Hardware_ECC_Recovered 0x001a 052 048 000 Old_age Always = - 155496913 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always = - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline = - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always = - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline = - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always = - 0 SMART Error Log Version: 1 ATA Error Count: 135 (device log contains only the most recent five errors) CR =3D Command Register [HEX] FR =3D Features Register [HEX] SC =3D Sector Count Register [HEX] SN =3D Sector Number Register [HEX] CL =3D Cylinder Low Register [HEX] CH =3D Cylinder High Register [HEX] DH =3D Device/Head Register [HEX] DC =3D Device Command Register [HEX] ER =3D Error register [HEX] ST =3D Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=3Ddays, hh=3Dhours, mm=3Dminutes, SS=3Dsec, and sss=3Dmillisec. It "wraps" after 49.710 days. Error 135 occurred at disk power-on lifetime: 22554 hours (939 days + 18= hours) When the command that caused the error occurred, the device was active or= idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 0f 57 23 e2 Error: UNC 128 sectors at LBA =3D 0x0223570f =3D= 35870479 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 0f 57 23 e2 00 04:35:02.346 READ DMA c8 00 80 8f 56 23 e2 00 04:35:02.344 READ DMA c8 00 80 0f 56 23 e2 00 04:35:02.770 READ DMA c8 00 80 8f 55 23 e2 00 04:35:02.753 READ DMA c8 00 80 ef 54 23 e2 00 04:35:02.708 READ DMA Error 134 occurred at disk power-on lifetime: 22553 hours (939 days + 17= hours) When the command that caused the error occurred, the device was active or= idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 0f 57 23 e2 Error: UNC 128 sectors at LBA =3D 0x0223570f =3D= 35870479 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 0f 57 23 e2 00 03:19:51.711 READ DMA c8 00 80 8f 56 23 e2 00 03:19:52.298 READ DMA c8 00 80 0f 56 23 e2 00 03:19:52.289 READ DMA c8 00 80 8f 55 23 e2 00 03:19:52.278 READ DMA c8 00 80 ef 54 23 e2 00 03:19:52.277 READ DMA Error 133 occurred at disk power-on lifetime: 22550 hours (939 days + 14= hours) When the command that caused the error occurred, the device was active or= idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 0f 57 23 e2 Error: UNC 128 sectors at LBA =3D 0x0223570f =3D= 35870479 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 0f 57 23 e2 00 00:10:08.887 READ DMA c8 00 80 8f 56 23 e2 00 00:10:08.827 READ DMA c8 00 80 0f 56 23 e2 00 00:10:08.548 READ DMA c8 00 80 8f 55 23 e2 00 00:10:08.546 READ DMA c8 00 80 ef 54 23 e2 00 00:10:08.544 READ DMA Error 132 occurred at disk power-on lifetime: 22536 hours (939 days + 0= hours) When the command that caused the error occurred, the device was active or= idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 0f 57 23 e2 Error: UNC 128 sectors at LBA =3D 0x0223570f =3D= 35870479 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 0f 57 23 e2 00 09:52:36.297 READ DMA c8 00 80 8f 56 23 e2 00 09:52:36.247 READ DMA c8 00 80 0f 56 23 e2 00 09:52:36.245 READ DMA c8 00 80 8f 55 23 e2 00 09:52:36.243 READ DMA c8 00 80 ef 54 23 e2 00 09:52:36.627 READ DMA Error 131 occurred at disk power-on lifetime: 22528 hours (938 days + 16= hours) When the command that caused the error occurred, the device was active or= idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 0f 57 23 e2 Error: UNC 128 sectors at LBA =3D 0x0223570f =3D= 35870479 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 0f 57 23 e2 00 02:29:14.434 READ DMA c8 00 80 8f 56 23 e2 00 02:29:14.434 READ DMA c8 00 80 0f 56 23 e2 00 02:29:14.398 READ DMA c8 00 80 8f 55 23 e2 00 02:29:14.398 READ DMA c8 00 80 ef 54 23 e2 00 02:29:14.398 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. =A5=BB=ABH=A5=F3=A5i=AF=E0=A5]=A7t=A4u=AC=E3=B0|=BE=F7=B1K=B8=EA=B0T=A1A= =ABD=AB=FC=A9w=A4=A7=A6=AC=A5=F3=AA=CC=A1A=BD=D0=A4=C5=A8=CF=A5=CE=A9=CE=B4= =A6=C5S=A5=BB=ABH=A5=F3=A4=BA=AEe=A1A=A8=C3=BD=D0=BEP=B7=B4=A6=B9=ABH=A5=F3= =A1C This email may contain confidential information. Please do not use or= disclose it in any way and delete it if you are not the intended= recipient. |