Menu
▾
▴
[sigrok-devel] [PATCH v3] Export LCR meter 'auto' bits as config keys instead of mqflags.
|
From: Janne H. <jah...@gm...> - 2014-10-20 20:03:38
|
The automatic selections of the measured quantity and equivalent circuit
model are more part of the configuration of the meter than attributes
of the measurement result. To reflect this, model them as config keys
instead of mqflags. This allows a driver that supports remote control to
implement 'set' method for them and has the additional benefit of saveing
two flag bits.
---
v3:
- Add config infos for new keys.
- Fix a bug where libsigrok would segfault if config key was read
before any measurements were parsed. Now the config will be
reported as 'NONE'.
- Use proper GVariant for the string list.
- Remove duplicates from the list of possible config key values.
include/libsigrok/libsigrok.h | 13 ++-
src/hwdriver.c | 8 ++
src/lcr/es51919.c | 185 ++++++++++++++++++++++++++++++++++++------
src/output/analog.c | 4 -
4 files changed, 177 insertions(+), 33 deletions(-)
diff --git a/include/libsigrok/libsigrok.h b/include/libsigrok/libsigrok.h
index 5a5f9ee..746ee37 100644
--- a/include/libsigrok/libsigrok.h
+++ b/include/libsigrok/libsigrok.h
@@ -340,10 +340,6 @@ enum sr_mqflag {
SR_MQFLAG_AVG = 0x40000,
/** Reference value shown. */
SR_MQFLAG_REFERENCE = 0x80000,
- /** Device selects the measured quantity automatically. */
- SR_MQFLAG_AUTOMQ = 0x100000,
- /** Device selects the measurement model automatically. */
- SR_MQFLAG_AUTOMODEL = 0x200000,
};
enum sr_trigger_matches {
@@ -815,6 +811,15 @@ enum sr_configkey {
/** Output frequency in Hz. */
SR_CONF_OUTPUT_FREQUENCY,
+ /** Measured quantity. */
+ SR_CONF_MEASURED_QUANTITY,
+
+ /** Measured secondary quantity. */
+ SR_CONF_MEASURED_2ND_QUANTITY,
+
+ /** Equivalent circuit model. */
+ SR_CONF_EQUIV_CIRCUIT_MODEL,
+
/*--- Special stuff -------------------------------------------------*/
/** Scan options supported by the driver. */
diff --git a/src/hwdriver.c b/src/hwdriver.c
index 454a767..b484b45 100644
--- a/src/hwdriver.c
+++ b/src/hwdriver.c
@@ -138,6 +138,14 @@ static struct sr_config_info sr_config_info_data[] = {
"Over-temperature protection", NULL},
{SR_CONF_OUTPUT_REGULATION, SR_T_STRING, "output_regulation",
"Output channel regulation", NULL},
+ {SR_CONF_OUTPUT_FREQUENCY, SR_T_UINT64, "output_frequency",
+ "Output frequency", NULL},
+ {SR_CONF_MEASURED_QUANTITY, SR_T_STRING, "measured_quantity",
+ "Measured quantity", NULL},
+ {SR_CONF_MEASURED_2ND_QUANTITY, SR_T_STRING, "measured_2nd_quantity",
+ "Measured secondary quantity", NULL},
+ {SR_CONF_EQUIV_CIRCUIT_MODEL, SR_T_STRING, "equiv_circuit_model",
+ "Equivalent circuit model", NULL},
{0, 0, NULL, NULL, NULL},
};
diff --git a/src/lcr/es51919.c b/src/lcr/es51919.c
index 5173ed6..b877349 100644
--- a/src/lcr/es51919.c
+++ b/src/lcr/es51919.c
@@ -294,6 +294,23 @@ static int send_config_update(struct sr_dev_inst *sdi, struct sr_config *cfg)
return sr_session_send(sdi, &packet);
}
+static int send_config_update_key(struct sr_dev_inst *sdi, uint32_t key,
+ GVariant *var)
+{
+ struct sr_config *cfg;
+ int ret;
+
+ cfg = sr_config_new(key, var);
+ if (!cfg)
+ return SR_ERR;
+
+ ret = send_config_update(sdi, cfg);
+ sr_config_free(cfg);
+
+ return ret;
+
+}
+
/*
* Cyrustek ES51919 LCR chipset host protocol.
*
@@ -393,6 +410,26 @@ static const uint64_t frequencies[] = {
100, 120, 1000, 10000, 100000, 0,
};
+enum { QUANT_AUTO = 5, };
+
+static const char *const quantities1[] = {
+ "NONE", "INDUCTANCE", "CAPACITANCE", "RESISTANCE", "RESISTANCE", "AUTO",
+};
+
+static const char *const list_quantities1[] = {
+ "NONE", "INDUCTANCE", "CAPACITANCE", "RESISTANCE", "AUTO",
+};
+
+static const char *const quantities2[] = {
+ "NONE", "DISSIPATION", "QUALITY", "RESISTANCE", "ANGLE", "AUTO",
+};
+
+enum { MODEL_NONE, MODEL_PAR, MODEL_SER, MODEL_AUTO, };
+
+static const char *const models[] = {
+ "NONE", "PARALLEL", "SERIES", "AUTO",
+};
+
/** Private, per-device-instance driver context. */
struct dev_context {
/** Opaque pointer passed in by the frontend. */
@@ -409,10 +446,28 @@ struct dev_context {
/** The frequency of the test signal (index to frequencies[]). */
unsigned int freq;
+
+ /** Measured primary quantity (index to quantities1[]). */
+ unsigned int quant1;
+
+ /** Measured secondary quantity (index to quantities2[]). */
+ unsigned int quant2;
+
+ /** Equivalent circuit model (index to models[]). */
+ unsigned int model;
};
-static int parse_mq(const uint8_t *buf, int is_secondary, int is_parallel)
+static const uint8_t *pkt_to_buf(const uint8_t *pkt, int is_secondary)
{
+ return is_secondary ? pkt + 10 : pkt + 5;
+}
+
+static int parse_mq(const uint8_t *pkt, int is_secondary, int is_parallel)
+{
+ const uint8_t *buf;
+
+ buf = pkt_to_buf(pkt, is_secondary);
+
switch (is_secondary << 8 | buf[0]) {
case 0x001:
return is_parallel ?
@@ -479,7 +534,7 @@ static void parse_measurement(const uint8_t *pkt, float *floatval,
const uint8_t *buf;
int state;
- buf = pkt + (is_secondary ? 10 : 5);
+ buf = pkt_to_buf(pkt, is_secondary);
analog->mq = -1;
analog->mqflags = 0;
@@ -499,16 +554,12 @@ static void parse_measurement(const uint8_t *pkt, float *floatval,
analog->mqflags |= SR_MQFLAG_HOLD;
if (pkt[2] & 0x02)
analog->mqflags |= SR_MQFLAG_REFERENCE;
- if (pkt[2] & 0x20)
- analog->mqflags |= SR_MQFLAG_AUTOMQ;
- if (pkt[2] & 0x40)
- analog->mqflags |= SR_MQFLAG_AUTOMODEL;
} else {
if (pkt[2] & 0x04)
analog->mqflags |= SR_MQFLAG_RELATIVE;
}
- if ((analog->mq = parse_mq(buf, is_secondary, pkt[2] & 0x80)) < 0)
+ if ((analog->mq = parse_mq(pkt, is_secondary, pkt[2] & 0x80)) < 0)
return;
if ((buf[3] >> 3) >= ARRAY_SIZE(units)) {
@@ -523,7 +574,7 @@ static void parse_measurement(const uint8_t *pkt, float *floatval,
*floatval *= (state == 0) ? units[buf[3] >> 3].mult : INFINITY;
}
-static unsigned int parse_frequency(const uint8_t *pkt)
+static unsigned int parse_freq(const uint8_t *pkt)
{
unsigned int freq;
@@ -537,6 +588,31 @@ static unsigned int parse_frequency(const uint8_t *pkt)
return freq;
}
+static unsigned int parse_quant(const uint8_t *pkt, int is_secondary)
+{
+ const uint8_t *buf;
+
+ if (pkt[2] & 0x20)
+ return QUANT_AUTO;
+
+ buf = pkt_to_buf(pkt, is_secondary);
+
+ return buf[0];
+}
+
+static unsigned int parse_model(const uint8_t *pkt)
+{
+ if (pkt[2] & 0x40)
+ return MODEL_AUTO;
+ else if (parse_mq(pkt, 0, 0) == SR_MQ_RESISTANCE)
+ return MODEL_NONE;
+ else if (pkt[2] & 0x80)
+ return MODEL_PAR;
+ else
+ return MODEL_SER;
+
+}
+
static gboolean packet_valid(const uint8_t *pkt)
{
/*
@@ -552,24 +628,38 @@ static gboolean packet_valid(const uint8_t *pkt)
return FALSE;
}
-static int send_frequency_update(struct sr_dev_inst *sdi, unsigned int freq)
+static int do_config_update(struct sr_dev_inst *sdi, uint32_t key,
+ GVariant *var)
{
- struct sr_config *cfg;
struct dev_context *devc;
- int ret;
devc = sdi->priv;
- cfg = sr_config_new(SR_CONF_OUTPUT_FREQUENCY,
- g_variant_new_uint64(frequencies[freq]));
+ return send_config_update_key(devc->cb_data, key, var);
+}
- if (!cfg)
- return SR_ERR;
+static int send_freq_update(struct sr_dev_inst *sdi, unsigned int freq)
+{
+ return do_config_update(sdi, SR_CONF_OUTPUT_FREQUENCY,
+ g_variant_new_uint64(frequencies[freq]));
+}
- ret = send_config_update(devc->cb_data, cfg);
- sr_config_free(cfg);
+static int send_quant1_update(struct sr_dev_inst *sdi, unsigned int quant)
+{
+ return do_config_update(sdi, SR_CONF_MEASURED_QUANTITY,
+ g_variant_new_string(quantities1[quant]));
+}
- return ret;
+static int send_quant2_update(struct sr_dev_inst *sdi, unsigned int quant)
+{
+ return do_config_update(sdi, SR_CONF_MEASURED_2ND_QUANTITY,
+ g_variant_new_string(quantities2[quant]));
+}
+
+static int send_model_update(struct sr_dev_inst *sdi, unsigned int model)
+{
+ return do_config_update(sdi, SR_CONF_EQUIV_CIRCUIT_MODEL,
+ g_variant_new_string(models[model]));
}
static void handle_packet(struct sr_dev_inst *sdi, const uint8_t *pkt)
@@ -577,16 +667,40 @@ static void handle_packet(struct sr_dev_inst *sdi, const uint8_t *pkt)
struct sr_datafeed_packet packet;
struct sr_datafeed_analog analog;
struct dev_context *devc;
- unsigned int freq;
+ unsigned int val;
float floatval;
int count;
devc = sdi->priv;
- freq = parse_frequency(pkt);
- if (freq != devc->freq) {
- if (send_frequency_update(sdi, freq) == SR_OK)
- devc->freq = freq;
+ val = parse_freq(pkt);
+ if (val != devc->freq) {
+ if (send_freq_update(sdi, val) == SR_OK)
+ devc->freq = val;
+ else
+ return;
+ }
+
+ val = parse_quant(pkt, 0);
+ if (val != devc->quant1) {
+ if (send_quant1_update(sdi, val) == SR_OK)
+ devc->quant1 = val;
+ else
+ return;
+ }
+
+ val = parse_quant(pkt, 1);
+ if (val != devc->quant2) {
+ if (send_quant2_update(sdi, val) == SR_OK)
+ devc->quant2 = val;
+ else
+ return;
+ }
+
+ val = parse_model(pkt);
+ if (val != devc->model) {
+ if (send_model_update(sdi, val) == SR_OK)
+ devc->model = val;
else
return;
}
@@ -740,8 +854,6 @@ SR_PRIV struct sr_dev_inst *es51919_serial_scan(GSList *options,
if (!(devc->buf = dev_buffer_new(PACKET_SIZE * 8)))
goto scan_cleanup;
- devc->freq = -1;
-
sdi->inst_type = SR_INST_SERIAL;
sdi->conn = serial;
@@ -777,6 +889,15 @@ SR_PRIV int es51919_serial_config_get(uint32_t key, GVariant **data,
case SR_CONF_OUTPUT_FREQUENCY:
*data = g_variant_new_uint64(frequencies[devc->freq]);
break;
+ case SR_CONF_MEASURED_QUANTITY:
+ *data = g_variant_new_string(quantities1[devc->quant1]);
+ break;
+ case SR_CONF_MEASURED_2ND_QUANTITY:
+ *data = g_variant_new_string(quantities2[devc->quant2]);
+ break;
+ case SR_CONF_EQUIV_CIRCUIT_MODEL:
+ *data = g_variant_new_string(models[devc->model]);
+ break;
default:
sr_spew("%s: Unsupported key %u", __func__, key);
return SR_ERR_NA;
@@ -827,6 +948,9 @@ static const uint32_t devopts[] = {
SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
SR_CONF_LIMIT_MSEC | SR_CONF_SET,
SR_CONF_OUTPUT_FREQUENCY | SR_CONF_GET | SR_CONF_LIST,
+ SR_CONF_MEASURED_QUANTITY | SR_CONF_GET | SR_CONF_LIST,
+ SR_CONF_MEASURED_2ND_QUANTITY | SR_CONF_GET | SR_CONF_LIST,
+ SR_CONF_EQUIV_CIRCUIT_MODEL | SR_CONF_GET | SR_CONF_LIST,
};
static const struct std_opt_desc opts = {
@@ -849,6 +973,17 @@ SR_PRIV int es51919_serial_config_list(uint32_t key, GVariant **data,
*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT64,
frequencies, ARRAY_SIZE(frequencies), sizeof(uint64_t));
break;
+ case SR_CONF_MEASURED_QUANTITY:
+ *data = g_variant_new_strv(list_quantities1,
+ ARRAY_SIZE(list_quantities1));
+ break;
+ case SR_CONF_MEASURED_2ND_QUANTITY:
+ *data = g_variant_new_strv(quantities2,
+ ARRAY_SIZE(quantities2));
+ break;
+ case SR_CONF_EQUIV_CIRCUIT_MODEL:
+ *data = g_variant_new_strv(models, ARRAY_SIZE(models));
+ break;
default:
sr_spew("%s: Unsupported key %u", __func__, key);
return SR_ERR_NA;
diff --git a/src/output/analog.c b/src/output/analog.c
index f984bc1..4f5acd6 100644
--- a/src/output/analog.c
+++ b/src/output/analog.c
@@ -221,10 +221,6 @@ static void fancyprint(int unit, int mqflags, float value, GString *out)
g_string_append_printf(out, " AVG");
if (mqflags & SR_MQFLAG_REFERENCE)
g_string_append_printf(out, " REF");
- if (mqflags & SR_MQFLAG_AUTOMQ)
- g_string_append_printf(out, " AUTOMQ");
- if (mqflags & SR_MQFLAG_AUTOMODEL)
- g_string_append_printf(out, " AUTOMODEL");
g_string_append_c(out, '\n');
}
--
2.1.1
|