From: Vladislav B. <vs...@vl...> - 2006-11-14 15:52:27
|
No, it isn't the module. The manual echo works. And after that, /etc/init.d/scst restart started working again. Mark Buechler wrote: > I see. When this happens to you please manually echo 1 to enable target > mode and cat the file afterwards to see it's value. I suspect it's the > module. > > - Mark. > > On 11/14/06, * Vladislav Bolkhovitin* <vs...@vl... > <mailto:vs...@vl...>> wrote: > > Mark Buechler wrote: > > Well then I must really be confused. The -pre1 version is the same I'm > > using on my system which works perfectly (for what I use it for). > I did > > a diff just to be sure. The line in Chances refers to the line: > > > > print $io $enable; > > Yes, it's uncommented in my code. > > > in enableTarget() which was commented out in -pre0 but not in > -pre1. May > > I ask what you changed to make it work for you? > > I didn't change anything important. You can see my version in the SVN. > > Actually, I was not fully correct, when I wrote that it still doesn't > enable the target mode for me. It enables at first, but then, maybe > after there are some errors, it stops doing so. It writes "Target > '0x210000e08b825e22' is enabled in configuration file, however is > currently disabled, enabling", but not actually enables it. I've just > done some more tests and it againg after some number of > "/etc/init.d/scst [restart|stop|start|reload-config]" stopped working. > > Vlad > > P.S. Please always do "Reply All", not "Reply". You're are deleting CC > otherwise. > > > - Mark. > > > > On 11/14/06, * Vladislav Bolkhovitin* <vs...@vl... > <mailto:vs...@vl...> > > <mailto:vs...@vl... <mailto:vs...@vl...>>> wrote: > > > > It's the same as you sent before > > > > Mark Buechler wrote: > > > Damn, you're right.. I sent the wrong file. I seem to be scatter > > brained > > > as of late. Please commit this one. > > > > > > - Mark. > > > > > > On 11/14/06, *Vladislav Bolkhovitin * <vs...@vl... > <mailto:vs...@vl...> > > <mailto:vs...@vl... <mailto:vs...@vl...>> > > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>>> wrote: > > > > > > What I tried, yes, but I stopped after I found the issue. > > > > > > Mark Buechler wrote: > > > > Hmm, I'm pretty sure I removed that since that's the > version I'm > > > using. > > > > > > > > How are other functions working? > > > > > > > > - Mark. > > > > > > > > On 11/14/06, *Vladislav Bolkhovitin * < vs...@vl... > <mailto:vs...@vl...> > > <mailto: vs...@vl... <mailto:vs...@vl...>> > > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>> > > > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>> > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>>>> wrote: > > > > > > > > It still doesn't enable the target mode for me.. I > > checked the > > > > difference with the older version and looks like you > > forgot to > > > put in > > > > the package the update for "Removed the comment which > > > prevented a target > > > > from being enabled in enableTarget()". > > > > > > > > Anyway, I've committed it with minor modifications in > > the SVN as > > > > scstadmin. Hope, you this will help you to fix the > other > > > issues from > > > > below in the future. > > > > > > > > Vlad > > > > > > > > Mark Buechler wrote: > > > > > Ok, here's another go.. can't guarentee all is > working > > since > > > I still > > > > > haven't setup a full test environment but I thought > > I'd put > > > this out > > > > > there for people who'd like to test. I'm using > it on my > > > production > > > > > server so I know it can at least perform basic > operations > > > > > (read/write/apply configuration). > > > > > > > > > > - Mark. > > > > > > > > > > On 11/8/06, *Vladislav Bolkhovitin* < > vs...@vl... <mailto:vs...@vl...> > > <mailto:vs...@vl... <mailto:vs...@vl...>> > > > <mailto: vs...@vl... <mailto:vs...@vl...> <mailto: > vs...@vl... <mailto:vs...@vl...>>> > > > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>> > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>>> > > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...> > > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>> <mailto:vs...@vl... > <mailto:vs...@vl...> > > <mailto: vs...@vl... <mailto:vs...@vl...>> > > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>>>>> > > > > > wrote: > > > > > > > > > > Mark Buechler wrote: > > > > > > Looks like I'm going to have to create a test > > system. > > > > > > > > > > > > As for the ctrl-c, that should always work and > > only when > > > > > -forceconfig is > > > > > > used, BTW. > > > > > > > > > > I also was surprised. Seems it's disabled > somewhere > > > > > > > > > > > - Mark. > > > > > > > > > > > > On 11/8/06, * Vladislav Bolkhovitin* > > <vs...@vl... <mailto:vs...@vl...> <mailto:vs...@vl... > <mailto:vs...@vl...>> > > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>> > > > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto: vs...@vl... <mailto:vs...@vl...>> > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>>> > > > > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>> > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>> > > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>> > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>>> > > > > > > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>> > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>> > <mailto: > > > vs...@vl... <mailto:vs...@vl...> <mailto:vs...@vl... > <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...> > > <mailto:vs...@vl... <mailto:vs...@vl...>>>> > > > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>> <mailto: > > vs...@vl... <mailto:vs...@vl...> <mailto:vs...@vl... > <mailto:vs...@vl...>>> > > > <mailto: vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>> > > <mailto:vs...@vl... <mailto:vs...@vl...> > <mailto:vs...@vl... <mailto:vs...@vl...>>>>>>> wrote: > > > > > > > > > > > > This time it worked for me and I like > it very > > > much. Some > > > > random > > > > > > observations: > > > > > > > > > > > > - README refers to sql subdir, which > doesn't > > exist > > > > > > > > > > > > - init.d/scst refers to scst.pl, which you > > renamed to > > > > scst. I > > > > > think, > > > > > > scst_adm would be a better name. > > > > > > > > > > > > - In the usage string in init.d/scst you > > forgot to add > > > > > reload-config > > > > > > option. > > > > > > > > > > > > - For automatically generated configs > > devices in > > > > [HANDLER] and > > > > > > [ASSIGNMENT] sections are listed in > > descending by LUNs > > > > order. > > > > > It would > > > > > > be much more convenient if they were > listed > > in the > > > > ascending order > > > > > > instead. > > > > > > > > > > > > - For the config in the attachment > > (automatically > > > > generated, BTW), > > > > > > /etc/init.d/scst start failed: > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > Loading and configuring SCSI Target > > Mid-level: scst > > > > Collecting > > > > > current > > > > > > configuration.. done. > > > > > > Applying configurations additions.. > > > > > > > > > > > > -> Target '0x210000e08b825e22' is > > enabled in > > > > configuration > > > > > > file, > > > > > > however is currently disabled, enabling. > > > > > > -> Enabling target mode for > SCST host > > > > > '0x210000e08b825e22'. > > > > > > -> Opening virtual device > 'disk1' at > > path > > > > > > '/home/vlad/w/disks/disk1' using handler > > > 'disk_fileio'.. > > > > > > WARNING: Failed to open virtual device > > 'disk1' at > > > path > > > > > > '/home/vlad/w/disks/disk1'. > > > > > > -> Opening virtual device > 'rd1' at path > > > > '/dev/ramdisk' > > > > > using > > > > > > handler 'disk_fileio'.. > > > > > > -> Creating security group > 'Test'.. > > > > > > -> Adding user > '50060b000001369d' to > > > security group > > > > > 'Test'.. > > > > > > WARNING: Unable to assign non-existant > device > > > 'disk1' to > > > > group > > > > > > 'Default'. > > > > > > -> Assign virtual device 'rd1' > to group > > > 'Default' at > > > > > LUN '0'.. > > > > > > WARNING: Unable to assign non-existant > device > > > 'disk1' to > > > > group > > > > > 'Test'. > > > > > > > > > > > > Encountered 3 error(s) while processing. > > > > > > Configuration applied, 8 changes made. > > > > > > All done. > > > > > > [config failed] > > > > > > . > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > If I remove block size setting 1024, it > > applys fine. > > > > > > > > > > > > - Also for the same config file > despite of > > > > /etc/init.d/scst start > > > > > > writes "Enabling target mode for SCST host > > > > '0x210000e08b825e22'", > > > > > > target_mode_enabled remains 0 for this > host, > > i.e. > > > target > > > > mode > > > > > wasn't > > > > > > enabled. > > > > > > > > > > > > - It doesn't detect if for existing > device in > > > [HANDLER] > > > > > section the > > > > > > file (and, I suspect, options) are > changed. > > > > > > > > > > > > - When I deleted a device from > [HANDLER] section > > > it detected > > > > > that, but > > > > > > with messages: > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > -force: Device disk2 is not defined in > saved > > > configuration, > > > > > removing. > > > > > > WARNING: Device '' not defined. > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > > > > > > > didn't deleted it from the system. > Surely, I > > > called it with > > > > > -ForceConfig > > > > > > option. > > > > > > > > > > > > - With -ForceConfig during 10 secs > pause it > > doesn't > > > > react on > > > > > Ctrl-C. > > > > > > > > > > > > - I think with -ForceConfig it isn't > > necessary to > > > always > > > > wait > > > > > for 10 > > > > > > sec. I think it would be better to > wait only if > > > "-force" > > > > > action is > > > > > > detected. This would also allow to add > this > > option to > > > > > /etc/init.d/scst > > > > > > reload-config. > > > > > > > > > > > > Thanks, > > > > > > Vlad > > > > > > > > > > > > Mark Buechler wrote: > > > > > > > Several months ago I started a > perl-based > > > configuration > > > > > script and > > > > > > perl > > > > > > > module. At Vlad's request I've > updated it to > > > work with > > > > 0.9.5 > > > > > and added > > > > > > > new functionality. I don't have a > test system > > > anymore to > > > > > test every > > > > > > > function so if anyone finds bugs to > report > > > please let me > > > > > know. The > > > > > > > configuration script always tries to do > > the safest > > > > thing and > > > > > will not > > > > > > > remove any configurations from a live > > system unless > > > > you force it > > > > > > to and > > > > > > > only after a 10 second pause to give you > > time to > > > exit out. > > > > > > > > > > > > > > - Mark. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > Using Tomcat but need to do more? > Need to > > > support web > > > > services, > > > > > > security? > > > > > > > Get stuff done quickly with > pre-integrated > > > technology to > > > > > make your > > > > > > job easier > > > > > > > Download IBM WebSphere Application > Server > > > v.1.0.1 based on > > > > > Apache > > > > > > Geronimo > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>> > > > > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>>> > > > > > > > > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>> > > > < > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>>>> > > > > > < > > > > > > > > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>> > > > > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>>> > > > > < > > > > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>> > > > > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>>>>> > > > > > > > > > > > < > > > > > > > > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>> > > > > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>>> > > > > > > > > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>> > > > < > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>>>> > > > > > > > > > > > > < > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>> > > > > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>>> > > > > > > > > > < > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>> > > > > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642> > > > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > <http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>>>>>> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > Scst-devel mailing list > > > > > > > Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>> > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>>> > > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>> > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>>>> > > > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>> > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>>> > > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>> > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>>>>> > > > > > > <mailto: > Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>> > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>>> > > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>> > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>>>> > > > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>> > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>>> > > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>> > > > <mailto: Scs...@li... > <mailto:Scs...@li...> > > <mailto:Scs...@li... > <mailto:Scs...@li...>>>>>> > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/scst-devel > > > > < > https://lists.sourceforge.net/lists/listinfo/scst-devel> > > > > > > > > > > > > > > > > > > > > > > > > # SCST Configurator v0.1 > > > > > > > > > > > > # Handler devices > > > > > > [HANDLER disk] > > > > > > # DEVICE <H:C:I:L> > > > > > > > > > > > > [HANDLER disk_fileio] > > > > > > DEVICE disk1,/home/vlad/w/disks/disk1,1024 > > > > > > DEVICE rd1,/dev/ramdisk > > > > > > > > > > > > [HANDLER cdrom_fileio] > > > > > > > > > > > > [HANDLER disk_perf] > > > > > > > > > > > > [HANDLER cdrom] > > > > > > # DEVICE <H:C:I:L> > > > > > > > > > > > > [HANDLER changer] > > > > > > # DEVICE <H:C:I:L> > > > > > > > > > > > > [HANDLER modisk] > > > > > > # DEVICE <H:C:I:L> > > > > > > > > > > > > [HANDLER modisk_perf] > > > > > > > > > > > > [HANDLER tape] > > > > > > # DEVICE <H:C:I:L> > > > > > > > > > > > > [HANDLER tape_perf] > > > > > > > > > > > > # Security Group > > > > > > [GROUP Test] > > > > > > # USER <user> > > > > > > USER 50060b000001369d > > > > > > > > > > > > # Device Assignments > > > > > > [ASSIGNMENT Test] > > > > > > # DEVICE <device>,<vlun> > > > > > > DEVICE disk1,0 > > > > > > #DEVICE DISK02,1 > > > > > > #DEVICE DISK03 > > > > > > > > > > > > [ASSIGNMENT Default] > > > > > > DEVICE disk1,1 > > > > > > DEVICE rd1,0 > > > > > > > > > > > > [TARGETS enable] > > > > > > HOST 0x210000e08b825e22 > > > > > > > > > > > > [TARGETS disable] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > |