From: Bart V. A. <bva...@ac...> - 2012-01-31 17:39:21
|
On Tue, Jan 31, 2012 at 5:23 PM, Xianghua Xiao <xia...@gm...>wrote: > I used the newest 2.2.x release with kernel 3.0.6 on powerpc, > blockio/iscsi-target. > > For local RAID5/SSD-array I have 400MB/s for READ, 280MB/s for WRITE. > For local RAID0/SSD-array I have 400MB/s for READ, 400MB/s for WRITE. > > I used netperf/iperf to check network, it's running 6+Gbps with jumbo > size of 7200Byte(I can not use 9600 jumbo), not bad. This is a > point-to-point link. > > I then used open-iscsi as the initiator, it give me: > RAID5 R/W: 280MB/s , 90MB/s > RAID0 R/W: 300MB/s, 180MB/s > Did you perhaps forget to apply the put_page_callback patch ? As you can see in this thread, some time ago I measured a bandwidth of more than 600 MB/s with iSCSI-SCST and IPoIB over a DDR IB network: http://groups.google.com/group/open-iscsi/browse_thread/thread/07f71acbdf08339d?pli=1 . Bart. |