[Rosegarden-user] Re: no sound with jack

[Ishai A. <is...@is...>]

Hi Eric,
Thank you for your response.
I have tried as you suggested, with a variance in response. I have shut 
down sound in KDE (kcontrol: Sound & multimedia | Sound system | enable 
the sound system - cleared) as opposed to killing artsd before.
There is still no sound in RoseGarden. When I open RoseGarden 
configuration I see, as before:

    MIDI OK, audio OK

The detailed status report is now different and show up RoseGarden as an 
ALSA client, but still no audio.
The output of rosegardensequencer is different from that of the 
"detailed status", though they ought be the same.
Both logs below.

Can you spot anything there?
Thank you!

Some information about my system:
Fedora Core 2
Kernel 2.6.5 (unmodified)
Intel on board sound card: I82801BAICH2
driver snd_intel8x0
All programs and depandant libraries are in their latest versions built 
from source this week

Ishai Asa
3D Graphics, Game Development
Tel:     +972-54-5691717
Email:   is...@is...
Website: http://www.ishaiasa.com

-----------------------------------------------------------------------------
log of RoseGarden detailed status
-----------------------------------------------------------------------------
Rosegarden 4-1.0 - AlsaDriver - alsa-lib version 1.0.10

JackDriver::initialiseAudio - JACK sample rate = 44100Hz, buffer size = 2048
JackDriver::initialiseAudio - creating disk thread
JackDriver::initialiseAudio - found 2 JACK physical outputs
JackDriver::initialiseAudio - connecting from "rosegarden:master out L" 
to "alsa_pcm:playback_1"
JackDriver::initialiseAudio - connecting from "rosegarden:master out R" 
to "alsa_pcm:playback_2"
JackDriver::initialiseAudio - found 2 JACK physical inputs
JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_1" to 
"rosegarden:record in 1 L"
JackDriver::initialiseAudio - connecting from "alsa_pcm:capture_2" to 
"rosegarden:record in 1 R"
JackDriver::initialiseAudio - initialised JACK audio subsystem

  ALSA Client information:


    Current timer set to "PCM playback 0-0-0"
AlsaDriver::initialiseMidi -  initialised MIDI subsystem

    Current timer set to "PCM playback 0-0-0"
Creating device 1 in Play mode -- no connection available
Default device name for this device is Anonymous MIDI device 1

  ALSA Client information:

    129,0 - (Rosegarden, Rosegarden input)        (WRITE ONLY) [ctype 1, 
ptype 1048576, cap 66]

New ports:
129:0 Rosegarden input (write)
(Reusing play device 1)

  ALSA Client information:

    129,0 - (Rosegarden, Rosegarden input)        (WRITE ONLY) [ctype 1, 
ptype 1048576, cap 66]


  ALSA Client information:

-----------------------------------------------------------------------------
log of rosegardensequencer
-----------------------------------------------------------------------------
Rosegarden 4-1.0 - AlsaDriver - alsa-lib version 1.0.10
could not attach as client

JackDriver::initialiseAudio - JACK server not running

  ALSA Client information:

    128,0 - (Rosegarden, Rosegarden input)              (WRITE ONLY) 
[ctype 1, ptype 1048576, cap 66]

Creating device 0 in Play mode for connection 128:0 Rosegarden input (write)
Default device name for this device is MIDI software device
AlsaDriver::setCurrentTimer((auto))
    Current timer set to "system timer"
AlsaDriver::initialiseMidi -  initialised MIDI subsystem


  ALSA Client information:

    128,0 - (Rosegarden, Rosegarden input)              (WRITE ONLY) 
[ctype 1, ptype 1048576, cap 66]



Sherry&Eric wrote:

>/"I've been trying to get RoseGarden work for the last days, with no success.
>My first step was making JACK (which was not on my system) and ALSA (an 
>older version) work. I've installed ALSA 1.0.10 lib and plugins and 
>JACKIK 0.100.0. ALSA works fine independatly (e.g. aplay file.wav), and 
>also with JACK, by running"
>
>/Could be a problem with artsd...try shutting down the artsd, I had the same problem at first with jackd. If you are running kde in a default setting it will not give up access to the sound server unless you shut it down in kcontrol.
>
>Eric Reesor
>  
>