Re: [Rivatv-help] Aopen Card
Status: Alpha
Brought to you by:
yvanoers
From: Doug W. <dwi...@ne...> - 2004-03-31 00:06:39
|
thebeast:~# dmesg | grep rivatv rivatv: Video4Linux driver for NVIDIA cards rivatv: Version 0.8.3 rivatv: MMX processor extension enabled rivatv: nVidia card found - rivatv0 rivatv: Unknown AOpen board: card not in database rivatv: PCI identifiers: 10DE 0110 A0A0 003C rivatv: Attempting to load most common decoder (SAA7108E) rivatv: device not PCI enabled; enabling rivatv: PCI nVidia NV10 card detected (GeForce2 MX [0x110], 32MB @ 0xF0000000) rivatv: I2C adapter driver for NVIDIA cards rivatv: video decoder chip registered rivatv: procfs file registered for rivatv0 rivatv: allocated YUV capture buffer (812 kb) rivatv: AGPGART: not available rivatv: AGP: disabled rivatv: Hash table layout: 4kB (9 bits) @ 0xE8710000 rivatv: No additional driver detected rivatv: PFIFO and PGRAPH disabled, enabling... rivatv: Setting up instance RAM for DMA rivatv: DMA transfers disabled rivatv: PMEDIA, PVIDEO and PFB disabled, enabling... rivatv: successfully requested IRQ 18 rivatv: Video4Linux device driver registered After I select the Tv-Box in xawtv and then use the echo "VideoDecoder: 2 = C1" > /proc/driver/rivatv I do get the tuner to work. Currently, I have no sound. I have insmod tuner, tvmixer, tvaudio and no sound via /dev/dsp or the physical output on the back of the card. So closer ;) But not just there yet... My hopes is to make this thing work with mythtv, which doesn't like the lack of /dev/dsp input. Currenlty I don't have a sound card in this system, and I was hoping that this card might do something similiar to btaudio.. ----- Original Message ----- From: "stefan" <st...@lk...> To: "Doug Wiltanger" <dwi...@ne...> Cc: <riv...@li...> Sent: Tuesday, March 30, 2004 12:44 PM Subject: Re: [Rivatv-help] Aopen Card > On Sun, 28 Mar 2004, Doug Wiltanger wrote: > > > I can't get this to display any TV tuner input. I can get xawtv to > > show the TV_Box as a possible input, but it doesn't tune at all. > > > > Here is the output from /proc/driver/rivatv > > > > thebeast:/etc# more /proc/driver/rivatv > > nVidia Chip: GeForce2 MX > > Model: AOpen [UNKNOWN] > > Architecture: NV10 (NV11) > > Access: Control [0xe8000000-0xe8ffffff] > > FB [0xf0000000-0xf7ffffff] > > Interrupts: 0 out of 0 (DMA: 0, Overlay: 0, Missing: 0) > > Device: available > > VideoDecoder: SAA7108E > > Tuner: Philips NTSC (FI1236,FM1236 and > > AudioDecoder: tda9850 > > AudioProcessor: unavailable > > IR chip: unavailable > > > I'm running 2.4.25 SMP. It's on a tyan S2466-4M motherboard with 2 > > 1900+'s. > > > > Can anyone offer any help? > > Hello! > > First you can tell us about your PCI identfiers (noted in `lspci -v` or in > /var/log/messages by rivatv). Then I can add your card to the list of > knowns and also specify a valid input mode for the tuner channel which is > necessary to get a video image from the tuner channel. > > Furthermore you can try > > $ echo "VideoDecoder: 2 = c? > > with ? being 0..9 (most probably it's 1 or 0). Try this having xawtv > running with the tuner channel (TV-Box) selected. > > Thanks in advance, > st...@lk... > |