+---------------------------+ |I start the Simulation but | 5V | | +| - |it do nothing after a Time | .----||------------o---------o----------------------. | | | | | | | |of 15 till 20 minutes | | | | | +---------------------------+ | | | | | .-. .-. .-. | | |1 KOhm | | 1 MOhm | | 1 MOhm | | | | | | | . | '-' '-' '-' /|\ | | | | Ua | | | | | / | | | o----------. o--------------o | === === | | | GND GND | | | '--------------------------------' _ Ue1 ||-+ | ||-+ | T1; T2; T3; T4 | | | K A / ||-> T1 | ||-> T3 | | .--|| ||---|<------o------||-+ '--------||-+ |have all the same values | | |_| | | | | | | 0,7V - | | |only Vt0 is changed of 0,1V | | 5V | |1 KOhm | | | | | TH=3000 ms | | | | |it should be displayed cartesian| | TL=3000 ms '-' | | | | | | | | |but it doesn't work !!! | | | | | | | | | | | |i don't know ? Please help. | === === | | '--------------------------------' GND GND | | _ Ue2 ||-+ ||-+ +-----------------------+ | | K A / ||-> T2 ||-> T4 |Without T3; T4 it works| .--|| ||---|<------o---o--||-+ .--------||-+ | | | |_| | | | | | |without any problems! | | 0,7V .-. ' | | | +-----------------------+ | 5V | |1 KOhm | | | | TH=1000 ms | | | | | | --------------------- | TL=1000 ms '-' | | | | |Transientsimulation| | | | | | | --------------------- | | | | | | TR1 | | | | | | Type=lin === === | === | === Start=0 GND GND | GND | GND Stop=8000 ms | | Points=1001 ms | | '----------------'
(created by AACircuit v1.28.6 beta 04/19/05 www.tech-chat.de)
Sry i don't now that the postcompiler don't take space taps.
this thraed can be cleared. i write an e-mail.
Log in to post a comment.
+---------------------------+
|I start the Simulation but |
5V | |
+| - |it do nothing after a Time |
.----||------------o---------o----------------------. | |
| | | | | |of 15 till 20 minutes |
| | | | +---------------------------+
| | | |
| .-. .-. .-.
| | |1 KOhm | | 1 MOhm | | 1 MOhm
| | | | | | | .
| '-' '-' '-' /|\ | | | | Ua |
| | | | / |
| | o----------. o--------------o |
=== === | | |
GND GND | | | '--------------------------------'
_ Ue1 ||-+ | ||-+ | T1; T2; T3; T4 |
| | K A / ||-> T1 | ||-> T3 | |
.--|| ||---|<------o------||-+ '--------||-+ |have all the same values |
| |_| | | | | |
| 0,7V - | | |only Vt0 is changed of 0,1V |
| 5V | |1 KOhm | | | |
| TH=3000 ms | | | | |it should be displayed cartesian|
| TL=3000 ms '-' | | | |
| | | | |but it doesn't work !!! |
| | | | | |
| | | | |i don't know ? Please help. |
=== === | | '--------------------------------'
GND GND | |
_ Ue2 ||-+ ||-+ +-----------------------+
| | K A / ||-> T2 ||-> T4 |Without T3; T4 it works|
.--|| ||---|<------o---o--||-+ .--------||-+ | |
| |_| | | | | | |without any problems! |
| 0,7V .-. ' | | | +-----------------------+
| 5V | |1 KOhm | | |
| TH=1000 ms | | | | | | ---------------------
| TL=1000 ms '-' | | | | |Transientsimulation|
| | | | | | ---------------------
| | | | | | TR1
| | | | | | Type=lin
=== === | === | === Start=0
GND GND | GND | GND Stop=8000 ms
| | Points=1001 ms
| |
'----------------'
(created by AACircuit v1.28.6 beta 04/19/05 www.tech-chat.de)
Sry i don't now that the postcompiler don't take space taps.
this thraed can be cleared. i write an e-mail.