Re: [Qlandkartegt-users] Fwd: Map export in QlandkarteGT 0.13; Set GPS on Qlandkarte M
Brought to you by:
kiozen
From: Oliver E. <oli...@gm...> - 2009-09-30 08:28:29
|
> > thank you for your fast answer. > > Please don't hurry, take your time and stick to your roadmap. :))) Not his roadmap, but Roadmap http://roadmap.sourceforge.net/ > > For the moment it's ok for me that way. > There are several strange things with the N560 which I did not yet > understand enough. Somehow I have no success to switch the wince/gpsapi > from using the built-in GPS to a bluetooth GPS although I change the COM > port in the settings menu. Maybe I should do some more research on that > ... I didn't succeed either. But I am no WinCE guy at all. Tell if you found out how to do it. The internal GPS of the Loox sucks. Oliver > > > Greetings, > > Helmut > > > Fabrice Crohas schrieb: > > Hi helmut, > > > > the NMEA driver should work if you set correct port and speed. But my > > Microsoft devel is not good i ve to redo it but no device to test, no > > external receiver. i will look tomorrow if i found time, my problem is > > just a MS limitation on the wince device and Roadmap does not handle it > > like i want, have to look better in Wince code > > > > Fabrice > > > > 2009/9/29 Helmut Schmidt <hs...@ar... <mailto:hs...@ar...>> > > > > Hi Fabrice, > > > > thank you for the attached cab fix. > > I was able to install it and now the built-in GPS is correctly > > accessed when I choose Wince/GPSD. One big step forward ... > > > > However I was not able to access a bluetooth GPS via the NMEA or > > NMEA/Mtk entries. > > I have tried 3 different GPS receivers > > - Navilock/GlobalSat BT-338 (Sirf 3 Chipset) > > - Wintec WBT-201 (Antaris4 Chipset) > > - QStarz BT-1300 (MTK Chipset) > > I was able to receive NMEA from each of them with other programs but > > with QLandkarte M, no GPS data are received in NMEA mode. For the > > QStarz BT-1300 I tried also NMEA/Mtk mode but also this does not > > give any success indication. It was obvious du to the LED blink > > codes of the GPS receivers that the bluetooth connection was set up > > successfully. > > > > Is it possible to activate any log/trace channels to get a better > > insight to the problem? > > > > Otherwise, I could make a live test session with Oliver at the next > > Regensburg geocaching meet-up. > > > > Thanks, > > > > Helmut > > > > > > Fabrice Crohas schrieb: > > > > Hi Helmut, > > > > Did you try this cab fix ? it create the entries in Wince to > > remove the failure. > > Yes i use gpsapi.h, you have to use the Wince/GPSD combobox > > entry only. Other thing comes from wince settings. For your > > external gps you have to use the serial std driver + set your > > poret name + speed. > > > > Anyway you need to install the cab fix before. > > > > > > Good luck and thanks for your test :) > > > > Fabrice > > > > > > |