Re: [openobex-users] Siemens MC60 + USB + OpenBSD

[Christian W. Z. <Christian@Zuckschwerdt.org>]

Hi,

I did some tests with a Siemens S65 now. The DCA-500 cable seems dead.
Both the DCA-510 and DCA-540 work. (It doesn't matter if the converter
in the cable or the one in the phone is used.)

While the BFB/BFC mode behaves friendly and can be left/reset, I had
some trouble leaving the plain OBEX mode. Neither reset nor escapes
work. Any hints on how to leave the Siemens transparent OBEX(3) mode
(BFB/QWE=3) are appreciated!

I tested and applied the patch for better io handling with USB serial
converters posted earlier http://dev.zuckschwerdt.org/obexftp/changeset/201

And I also added a check for transparent OBEX connections
http://dev.zuckschwerdt.org/obexftp/changeset/202

This way connects should work repeatedly even when the OBEX mode is
still active. No need to unplug your phones anymore. S.a.
http://dev.zuckschwerdt.org/openobex/wiki/ObexFsScreenshots


regards,
Christian