Re: [Openh323gk-users] Broken Content behind GNUGK

[Josh R. <rog...@ca...>]

I will certainly try this, and see if it does it.  In the meantime, does my config look ok? I have a "totalbandwidth" and "maximumbandwidthpercall" setting enabled, should I just scrap those?  What I wanted was to make sure the gatekeeper gives enough bandwidth to each client up to the max the gatekeeper could support (the unit is on a 1 gigabit connection with 100mb to the internet). My intent is a simple gatekeeper that sits at site A, and both site A and site F connect to it to make calls and pass content to eachother. I will admit some of the settings I put in because I am new to video conferencing and made assumptions I would need them based on my knowledge of my network.  I used the manual for reference.  Any thoughts from the community would be appreciated.  Thanks!

[Gatekeeper::Main]
#NetworkInterfaces=
TotalBandwidth=100000000
MaximumBandwidthPerCall=1966080
StatusPort=7000
StatusTraceLevel=2
MaxStatusClients=50
TimestampFormat=RFC822



[GkStatus::Auth]
rule=allow
Shutdown=0



[RoutedMode]
GKRouted=1
H245Routed=0
Q931PortRange=20000-20999
H245PortRange=30000-30999
TcpKeepAlive=1



[Proxy]
Enable=1
T120PortRange=40000-40999
RTPPortRange=50000-59999
ProxyForSameNAT=1
EnableRTPMute=1

[RoutingPolicy]
default=explicit,ldap,internal,srv,dns,parent,neighbor

-----Original Message-----
From: Jan Willamowius [mailto:ja...@wi...] 
Sent: Thursday, April 09, 2015 4:58 AM
To: ope...@li...
Subject: Re: [Openh323gk-users] Broken Content behind GNUGK

Hi Josh,

H.239 content streams are handled internally like any other video stream, so they should behave like regular calls (quality wise).
There should be no config switches necessary.

You should check if you have enough bandwidth and CPU power left when you add the content stream: If you start a separate 2nd call at the same time (with similar bandwidth usage as your content stream) does that get through without distortion ?

Regards,
Jan

--
Jan Willamowius, Founder of the GNU Gatekeeper Project EMail  : ja...@wi...
Website: http://www.gnugk.org
Support: http://www.willamowius.com/gnugk-support.html

Relaxed Communications GmbH
Frahmredder 91
22393 Hamburg
Geschäftsführer: Jan Willamowius
HRB 125261 (Amtsgericht Hamburg)
USt-IdNr: DE286003584


Josh Rogalski wrote:
> 
> Hello everyone, I am running GNUGK 3.8 as our production video conferencing gatekeeper.  We primarily connect to it from our two sites, and we both run Polycom RealPresence Desktop 3.3 on both ends.  The video call is fine, but when we send content (we usually send the PC's monitor1 at our A site to our F site), it often gets choppy or artifacts and it barely viewable.  Is there something specific in my config that I need to enable to ensure proper display of content to the far site?  I can send my config if needed.  Any information is appreciated thanks! 


------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________________

Posting: mailto:Ope...@li...
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/