From: Guy A P. \(R. Student\) <ga...@ri...> - 2007-04-30 19:30:51
|
Hi Florian, Thanks! I appreciate it; I was banging my head against the wall trying = to get the compiled kernel to work, and I got nowhere fast. I was even = invoking the assistance of the Linux Kernel Newbies IRC channel. The = experts in the channel were at a loss to explain the problem. The reason that I had mentioned about the _SDA_BASE not being defined in = the symbol table for kernels I compiled was because I felt it signified = that I was doing something different from the way the old toolchain had = done it. Or, more specifically, I was doing something different that the = way the pre-compiled kernels on SF had been compiled. --Guy -----Original Message----- From: nub...@li... on behalf of = Florian Boelstler Sent: Sun 4/29/2007 2:40 PM To: For users of Linux on NuBus PowerMacs Subject: Re: [Nubus-pmac-users] kernel build error ... =20 Hi again, Florian Boelstler wrote: > Therefore I guess current state of CVS is broken, > since the behavior is different from what I observed before I did = update > my cvs snapshot. I hereby revert this assumption. My PB1400 also turns off itself, using a kernel built against CVS tag linux-2_4_32. Next test will be done using "Sarge-based" toolchain (or at least earlier binutils). I will try to do that during next week. Cheers, Florian -------------------------------------------------------------------------= This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Nubus-pmac-users mailing list Nub...@li... https://lists.sourceforge.net/lists/listinfo/nubus-pmac-users |