RE: [Ndiswrapper-general] FC4+ndis1.16, can't set ESSID, mode etc
Status: Beta
Brought to you by:
pgiri
From: Tomas L. <to...@tl...> - 2006-05-29 11:29:34
|
> -----Original Message----- > From: James Harrison [mailto:jam...@ya...] > Sent: Monday, May 29, 2006 10:35 AM > To: Tomas Larsson > Subject: Re: [Ndiswrapper-general] FC4+ndis1.16, can't set > ESSID, mode etc > > I am using ndiswrapper on with FC4 and 5. Post your ifcfg-wlan0 file. > > James > > --- Tomas Larsson <to...@tl...> wrote: > > > Dear group. > > I guess this has been asked before, but I can't find any > conclusive answers. > > > > Using FC4 with 2.6.16-1.2108_FC4 kernel, compiled for 8k stack. > > With a D-Link DWL-G630 Rev E1 PCMIA/Cardbus-card. This card uses > > RaLink RT61 chipset. > > Downloaded the latest driver from D-Link and from RaLinktech. > > > > Ndiswrapper compiled OK without any errors, loaded the > driver without > > any errors and the module loaded w/o any problem. > > > > But I can't set mode nor can I set ESSID. > > > > Anyone that can share some ideas. > > > > With best regards > > > > Tomas Larsson > > Sweden > > > > Verus Amicus Est Tamquam Alter Idem Here is my ifcfg-ra0 file, the card/driver is installed as ra0 GATEWAY=192.168.0.1 DHCP_HOSTNAME=springbox CHANNEL=6 PEERDNS=no IPV6INIT=no HWADDR=00:13:46:79:28:b1 BROADCAST=192.168.0.255 RATE=Auto USERCTL=no MODE=Managed TYPE=Wireless DEVICE=ra0 ESSID=TLEC NETMASK=255.255.255.0 MTU="" IPADDR=192.168.0.20 NETWORK=192.168.0.0 DOMAIN= ONBOOT=yes BOOTPROTO=static I'm supposed to use WPA-PSK but can't get the card to do anything. With best regards Tomas Larsson Sweden Verus Amicus Est Tamquam Alter Idem |