[Ndiswrapper-general] Request for assistance

[Mark G. <vze...@ve...>]

I have a system running kernel 2.6.16.  Ndiswrapper is compiled and installed
but modprobe ndiswrapper installs the module without it connecting with my
device, even though "Ndiswrapper -l" reports "driver installed, hardware
present".  The devices file in /proc/bus/usb/ reports my device as follows:
T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.01 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=1630 ProdID=0042 Rev= 1.00
S:  Manufacturer=2Wire Inc
S:  Product=2Wire USB Remote NDIS Ethernet
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr= 40mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=1ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Can this failure to communicate with the device be cured by additional
modules and/or modifications to the kernel; and, if so, which usb networking,
and/or atm, and/or other functions need to be added?

Thanks in advance,
Mark