From: Andres V. <and...@gm...> - 2010-07-23 10:16:39
|
Hi, Is it possible to program msp430f2234 MCU with EZ430-RF2500 board and mspdebug. EZ430-RF2500 board comes with msp430f2274 MCU and it differs from f2234 only from RAM size as far as I know. I made a led togglerer for f2234, i can upload it, but it doesn't toggle pin. #include "msp430x22x4.h" volatile unsigned int i; int main(void) { WDTCTL = WDTPW + WDTHOLD; P2DIR |= 0x01; for(;;) { P2OUT ^= 0x01; i = 50000; while (i != 0) { i--; } } } for( ; ; ) Daniel, could you confirm that msp430f2234 is supported by mspdebug. Andres On 29.06.2010, at 4:42, da...@to... wrote: > MSPDebug version 0.9 is now available. It features support for a > couple of new devices (F2132 and F169), hopefully fixed support for > 5xxx devices with FET430UIF programmers, and support for the Olimex > MSP-JTAG-TINY programmer via either libusb or via a tty device. > > Note that command-line options have changed in an effort to keep things > tidy, so you'll probably want to check --help before attempting to use > the new version. The new options scheme is: > > mspdebug [options] <driver> [command ...] > > Where <driver> is one of "rf2500", "olimex", "sim", "uif" or > "uif-bsl". > > You can download the new version from here: > > http://mspdebug.sourceforge.net/download.html > > - Daniel > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Sprint > What will you do first with EVO, the first 4G phone? > Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first > _______________________________________________ > Mspgcc-users mailing list > Msp...@li... > https://lists.sourceforge.net/lists/listinfo/mspgcc-users |