From: Nicolas <e....@gm...> - 2006-10-11 21:16:03
|
On Tue, Oct 10, 2006 at 07:40:35PM +0200, Bernhard Praschinger wrote: > Hallo > > >>>> Maybe I update the next time from Kernel 2.6.17.2 to 2.6.18. That I can > >>>> tell you if it is a kernel related Problem. > >>> That would be nice. I hope you'll get enough spare time to do that. > >> I didn't have time to install the 2.6.18 kernel by now. I will try to do > >> it this week. > > I have just compiled the 2.6.18 kernel. > > Recording works with the DC30 card. But for some strange reason not with > the BUZ :-( > I get a lot messages like that: > Oct 10 19:27:04 shadowlord kernel: i2c_adapter i2c-0: master_xfer[1] R, > addr=0x47, len=1 > And after Some time I get that message: > **ERROR: [lavrec] Error syncing on a buffer: Timer expired > > That is different to your problem. I will have to take a closer look. > > auf hoffentlich bald, > > Berni the Chaos of Woodquarter Bernhard, Am I loading the right module? lspci says: 00:09.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video cutting chipset (rev 01) And the module I load is: modprobe zr36067 card=1 debug=4 Here's what I get in /etc/modutils/video: alias char-major-81 zr36067 options zr36067 card=1 pre-install zr36067 (modprobe saa7110; modprobe adv7175) I think I used the zoran module last time I used my zoran card (old config and old kernel). The zoran kernel isn't anymore available in 2.6.18: modprobe zoran FATAL: Module zoran not found. Nicolas. |