[misterhouse-users] Problems with caller-id setup file configuration

[Tom K. <tko...@ea...>]

Hi Guys,

    I'm trying to get caller-id up and running on my win98 box.  It =
reported caller-id
initially, but now I get modem baud rate error messages.  Any =
suggestions?

        I am running files: phone.pl, phon_logs.pl, phone_modem.pl.   My =
set up is:


      # SERIAL INITIALIZATION IN MH.PRIVATE.INI

#----
# Phone info --- needed only if you have a caller ID interface
#---
local_area_code=3D317
area_code_file=3D$Pgm_Root/data/phone/phone.area_codes.list
caller_id_file=3D$Pgm_Root/data/phone/phone.caller_id.list.example
#aller_id_format =3D first last
caller_id_format =3D last first
serial_modem_port=3DCOM3
serial_modem_baudrate=3D57600  #Same setting as in Modems,  Control =
Panel
serial1_port=3D
serial1_baudrate=3D
serial1_handshake=3D
serial1_datatype=3D
serial2_port=3D2
serial2_baudrate=3D9600
serial2_handshake=3D
serial2_datatype=3D


###  I THEN RUN MH THE COMMANDS:
  #SET DEBUG TO SERIAL
  #PHONE: START PHONE MODEM PORT MONITORING
 #GET THE FOLLOWING PERL BAUD ERROR MESSAGES:

Serial_Item stop failed for port serial_modem
testing port COM3 ...  available
Starting port serial_modem on port COM3
Missing REQUIRED setting for BAUD at mh line 2589
write_settings failed, closing port at mh line 2589
Serial_Item start failed for port serial_modem
Serial_Item: port=3Dserial_modem self=3DSerial_Item=3DHASH(0x22c3498) =
state=3Dinit data=3D
ATE1V1X4&C1&D2S0=3D0+VCID=3D1 interface=3D