From: Jim D. <ji...@du...> - 2011-02-12 18:55:19
|
On 02/11/2011 09:39 PM, Eloy Paris wrote: Manual Method: 1. Initiate linking the SwitchLinc as a controller by pressing down on it's set button for 3 seconds (the light will flash to indicate it is in linking mode). 2. Either hold down on the PLM's set button for three seconds or locate the insteon item commands (via the web interface) and select "complete linking as responder" for the PLM. The latter option is possibly more useful if the PLM is located in a difficult to reach location. Two questions: 1) Can I used "complete linking as responder" with the insteon-branch, as my PLM and KEYPADLINC are on different floors? 2) If I use the PLM set button, how then will the PLM using entires A0, A1, A2, A3 in its table? I don't understand here. INSTEON_KEYPADLINC, 0E.76.34:01, living_room_ceiling INSTEON_KEYPADLINC, 0E.76.34:03, kpl_button_A, Insteon_Buttons INSTEON_KEYPADLINC, 0E.76.34:04, kpl_button_B, Insteon_Buttons INSTEON_KEYPADLINC, 0E.76.34:05, kpl_button_C, Insteon_Buttons INSTEON_KEYPADLINC, 0E.76.34:06, kpl_button_D, Insteon_Buttons INSTEON_ICONTROLLER, a0, surrogate_kpl_button_A, hidden INSTEON_ICONTROLLER, a1, surrogate_kpl_button_B, hidden INSTEON_ICONTROLLER, a2, surrogate_kpl_button_C, hidden INSTEON_ICONTROLLER, a3, surrogate_kpl_button_D, hidden INSTEON_KEYPADLINC, 15.63.FC:01, courtyard_stairs INSTEON_KEYPADLINC, 15.63.FC:03, courtyard_button_A, Insteon_Buttons INSTEON_KEYPADLINC, 15.63.FC:04, courtyard_button_B, Insteon_Buttons INSTEON_KEYPADLINC, 15.63.FC:05, courtyard_button_C, Insteon_Buttons INSTEON_KEYPADLINC, 15.63.FC:06, courtyard_button_D, Insteon_Buttons INSTEON_ICONTROLLER, a4, surrogate_courtyard_button_A, hidden INSTEON_ICONTROLLER, a5, surrogate_courtyard_button_B, hidden INSTEON_ICONTROLLER, a6, surrogate_courtyard_button_C, hidden INSTEON_ICONTROLLER, a7, surrogate_courtyard_button_D, hidden Thanks, Jim > > Cheers, > > Eloy Paris.- > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > ________________________________________________________ > To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 > > |