Re: [mh] CM11a issues -- help!

[Rick S. <mis...@co...>]

the only thing that's every worked for me is waiting longer. 
Eventually (if not fried) it will fix itself. I had one I tinkered 
with for several weeks, gave up, tossed it in a drawer, and 6 months 
later worked fine.

That CM11 is the entire reason I switched to an environment where I 
do sending with a CM17 and RF. I can't read the line, but have always 
figured out ways to work around it.

Rick


At 11:23 AM 10/19/2008, H Plato wrote:
>Recently we've had a brief power outage, which has now messed up my
>CM11a setup. Misterhouse can communicate with the CM11a, however the
>CM11a cannot send or receive onto the powerline anymore.
>
>I've unplugged it overnight to see if that might 'reset' the device,
>however it hasn't helped. I've turned on X10 debugging, and I can see
>the proper communication:
>
>Cm11 data=85 hex=55
>CM11 done
>Backlog:
>X10: interface=cm11 isfunc=1 save_unit=XI6 data XIK
>CM11 send data=IK
>Cm11 dim=0 header=00000110 hb=0111 cb=0011 bd=0x06 ,0x73 checksum=0x79
>CM11 send: 0673 try: 1
>..
>CM11 data=121 hex=79
>CM11 ack
>CM11 send pc_ok, try: 1
>.............
>CM11 data=85 hex=55
>CM11 done
>Backlog:
>
>However no effect. I have Switchlinc switches that blink with X10
>activity. When turning devices on and off through the web interface, I
>don't see any X10 traffic on my powerline. Is there anything else I
>can do to fix/troubleshoot?
>
>
>
>
>
>-------------------------------------------------------------------------
>This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
>Build the coolest Linux based applications with Moblin SDK & win great prizes
>Grand prize is a trip for two to an Open Source event anywhere in the world
>http://moblin-contest.org/redirect.php?banner_id=100&url=/
>________________________________________________________
>To unsubscribe from this list, go to: 
>http://sourceforge.net/mail/?group_id=1365