From: Neil C. <nc...@li...> - 2007-09-29 15:40:06
|
Jason Sharpee wrote: > On Fri, 28 Sep 2007, Gregg Liming wrote: > >> Hi Jason, >> >> Quoting Jason Sharpee (9/27/07 7:46 AM): >> >>> However, I am not translating the status_request result. I tried it out >>> just now on my test device and can easily see where it is responding with >>> a command1 '00' and a command2 with a hex level '00-FF'. Should be no >>> more than a 5 minute change to the code and ill see if I can add that this >>> weekend as well. >> While you're making mods, would you consider applying the attached diff >> (or something of comparable outcome) to Insteon_Device so that instances >> "play nice" w/ your Light_Item.pm? Note that I have m_write default to >> 1 so that "transmit only" instances would have to: $obj->writable(0); >> I'm not opposed to defaulting the other way so long as writable exists. >> >> On a related note, do you have plans for addressing/implementing the >> Insteon-specific (non-x10) ALL-Linking capabilities? I'm quite >> interested in anything along these lines and would be happy to >> contribute (code, test, etc.) anyway that would help. >> > > Gregg, thanks for the patch (I tossed too much out on my cleaup). I > checked in support for receiving status requests, cleaned up the debug > messages, and added your patch. > > As I am not an Insteon user myself so I only intended the Insteon code to > kick off efforts in this realm by others that do use it. I am not > planning on making any more changes to that code, so anyone is welcome to > make changes directly in SVN. If anyone has questions on the > implementation feel free to contact me, however, I am going to start > looking into an xAP device type. > > Once again, I would like to thank everyone for their help in getting this > up and running! I don't have a PLM so I don't know how I'll support it but I do have the SDK (and I'm prepared to use it ;-). I spoke with the Insteon folks and at the time they had no problem with me posting my code with the information likely to be contained there in. To that end I intend to add support for linking via a web interface along with support for some other goodies that Insteon can support. I really don't want to spend another $60 on the PLM (I've got a bunch of PLCs already) as I could better spend that money on more modules. :-) Weird the PLM development guide can be found on Google quite easily. See: http://www.techmall.com/topic.asp?TOPIC_ID=1659&whichpage=2 -- Linux Home Automation Neil Cherry nc...@li... http://www.linuxha.com/ Main site http://linuxha.blogspot.com/ My HA Blog Author of: Linux Smart Homes For Dummies |