Re: [mh] X10 Newbie looking for answers

[donnyf <don...@ho...>]

Thank you for the reply.  So if I understand you correctly, I cannot use the
CM11A to 'snope' on the X10 lines to see what signals are travelling on
them?  I suppose I should have researched this better.  I thought that I
could use the CM11A to get feedback from motion sensors, keychain remotes,
etc .. Grr.


MrT wrote:
> 
> You don't need MisterHouse if you're doing this:
> [Remote]  --RF-->  [TM751Transceiver]  --X10-->  [X10 Module]
> 
> Keychain remote transmits an RF signal that is received by the transceiver
> and converted into an X10 signal on the powerline that is received by the
> desired module.
> 
> If you want MisterHouse to be the sole receiver of RF transmissions, you
> need an X10 MR26A or a WGL Designs W800.
> [Remote]  --RF-->  [MR26A Transceiver]  --RS232--> [MisterHouse]
> --RS232--> [CM11A] --X10--> [X10 Module]
> 
> Keychain remote transmits an RF signal that is received by the MR26A and
> converted into an RS232 signal that is read by MisterHouse, processed by
> your script, and transmitted via RS232 to the CM11A that converts it into
> X10 on the powerline and received by the desired module. (Whew!)
> 

-- 
View this message in context: http://www.nabble.com/X10-Newbie-looking-for-answers-tf3423756.html#a9558779
Sent from the Misterhouse - User mailing list archive at Nabble.com.