From: David H. L. Jr. <dh...@dl...> - 2006-12-23 15:10:54
|
James; There are some other recent posts on the topic. Please take a look back at the archives over the past could of weeks to TI103 posts. I might miss something here. The first issue is to isolate between the driver, and MH. I am not sure the correct location in the Windows tree, but in the Linux tree under /usr/share/perl5/misterhouse/site there should be a send_ti103.pl. You need to look at the begining of the file for the serial port. This is a perl script. It is easy to change, and the only change you might need to make is setting the correct serial port if your TI103 is not on the one specified towards the top of the file. After you have the port correct you should now be able to use this program completely independently of MH to send X10 commands to the TI103. BTW there is a send_sm11.pl that works pretty similarly. send_ti103.pl uses the TI103.pm perl module - exactly as MH does, but without going through MH. So you can send X10 commands like ./send_ti103.pl A1AON turning device A1 On. It should accept most any MisterHouse style X10 command string. I beleive it will even accept multiple strings, but it has been a while. If this works the TI103 and driver are working, and your problem is with MH. If not then e-mail me it may be a problem with the driver. The first place I would check would be the ti103_port setting in your mh.ini. I beleive there was a post indicating that there was a minor serial problem in a very recent release of MH that has been fixed. That would be where I would look next. James Paek wrote: > Hi > > I purchased a TI103 recently from SmarthomeUSA. > > I tried a TI103 with linux and even Windows XP but I can not make this > things to work. > > Can you help me to share your setup? > > > Thanks in advance, > > James > > > ----- Original Message ----- > From: "Dickie Bradford" <dbr...@ne...> > To: "The main list for the MisterHouse home automation program" > <mis...@li...> > Sent: Monday, December 11, 2006 9:11 PM > Subject: Re: [mh] TI103 > > > >> GOT IT... WORKS Great. Thnx Matt & David for the quick help :-) >> >> Dickie >> >> -----Original Message----- >> From: mis...@li... >> [mailto:mis...@li...]On Behalf Of >> Matthew >> Williams >> Sent: Monday, December 11, 2006 8:13 PM >> To: dbr...@ne...; The main list for the MisterHouse home >> automation program >> Subject: Re: [mh] TI103 >> >> >> Dickie Bradford wrote: >> >>> David: >>> >>> I did what you said and did testing of the TI103 with the program >>> sendti103.pl from the command line (./sendti103.pl p9poff) and got it >>> working at that point, but I still have the issue where MH won't do >>> anything, it really doesnt give an error, just this line: >>> >>> Dummy_Item #2: trying to set state off >>> Dummy_Item #2: trying to set state on >>> Dummy_Item #2: trying to set state off >>> Dummy_Item #2: trying to set state on >>> >> Dickie, >> >> Which version are you running - 2.103 or the trunk? If the trunk, then >> you >> need to upgrade to at least r1019 as a problem was fixed in this revision >> for the t103. >> >> If you are running 2.103, then you can either use the latest trunk, or >> manually make some changes to mh/lib/Serial_Item.pm and >> mh/lib/X10_Interface.pm. For each file, you need to add ti103 to >> @supported_interfaces and X10_Interface_names respectively. >> >> Matt >> >> ------------------------------------------------------------------------- >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to share >> your >> opinions on IT & business topics through brief surveys - and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> ________________________________________________________ >> To unsubscribe from this list, go to: >> http://sourceforge.net/mail/?group_id=1365 >> -- >> No virus found in this incoming message. >> Checked by AVG Free Edition. >> Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006 >> 3:41 PM >> >> -- >> No virus found in this outgoing message. >> Checked by AVG Free Edition. >> Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006 >> 3:41 PM >> >> >> ------------------------------------------------------------------------- >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to share >> your >> opinions on IT & business topics through brief surveys - and earn cash >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV >> ________________________________________________________ >> To unsubscribe from this list, go to: >> http://sourceforge.net/mail/?group_id=1365 >> >> > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ________________________________________________________ > To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 > > -- Dave Lynch DLA Systems Software Development: Embedded Linux 717.627.3770 dh...@dl... http://www.dlasys.net fax: 1.253.369.9244 Cell: 1.717.587.7774 Over 25 years' experience in platforms, languages, and technologies too numerous to list. "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." Albert Einstein |