From: <<<<< D. B. >>>>> <dbr...@ne...> - 2006-12-22 20:09:43
|
TI103 Setup These are the settings I have used to setup the TI103, YMMV, But it works for me. :-) TI103 Jumper Settings --------------------- 1 - OFF 2 - OFF 3 - OFF 4 - OFF 5 - OFF 6 - OFF 7 - ON 8 - ON My mh.private.ini ----------------- ti103_port=/dev/ttyS1 My lights.mht ------------- X10A, P2, Ceiling_Light, MasterBedroom, TI103, AM486 The LAST Step: -------------- >Dickie, > >Which version are you running - 2.103 or the trunk? If the trunk, then you >need to upgrade to at least r1019 as a problem was fixed in this revision >for the t103. > >If you are running 2.103, then you can either use the latest trunk, or >manually make some changes to mh/lib/Serial_Item.pm and >mh/lib/X10_Interface.pm. For each file, you need to add ti103 to >@supported_interfaces and X10_Interface_names respectively. > >Matt GOOD LUCk :-) DICKIE -----Original Message----- From: James Paek [mailto:jpa...@gm...] Sent: Thursday, December 21, 2006 9:28 AM To: dbr...@ne...; The main list for the MisterHouse home automation program Subject: Re: [mh] TI103 Hi I purchased a TI103 recently from SmarthomeUSA. I tried a TI103 with linux and even Windows XP but I can not make this things to work. Can you help me to share your setup? Thanks in advance, James ----- Original Message ----- From: "Dickie Bradford" <dbr...@ne...> To: "The main list for the MisterHouse home automation program" <mis...@li...> Sent: Monday, December 11, 2006 9:11 PM Subject: Re: [mh] TI103 > GOT IT... WORKS Great. Thnx Matt & David for the quick help :-) > > Dickie > > -----Original Message----- > From: mis...@li... > [mailto:mis...@li...]On Behalf Of > Matthew > Williams > Sent: Monday, December 11, 2006 8:13 PM > To: dbr...@ne...; The main list for the MisterHouse home > automation program > Subject: Re: [mh] TI103 > > > Dickie Bradford wrote: >> David: >> >> I did what you said and did testing of the TI103 with the program >> sendti103.pl from the command line (./sendti103.pl p9poff) and got it >> working at that point, but I still have the issue where MH won't do >> anything, it really doesnt give an error, just this line: >> >> Dummy_Item #2: trying to set state off >> Dummy_Item #2: trying to set state on >> Dummy_Item #2: trying to set state off >> Dummy_Item #2: trying to set state on > > Dickie, > > Which version are you running - 2.103 or the trunk? If the trunk, then > you > need to upgrade to at least r1019 as a problem was fixed in this revision > for the t103. > > If you are running 2.103, then you can either use the latest trunk, or > manually make some changes to mh/lib/Serial_Item.pm and > mh/lib/X10_Interface.pm. For each file, you need to add ti103 to > @supported_interfaces and X10_Interface_names respectively. > > Matt > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006 > 3:41 PM > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.432 / Virus Database: 268.15.15/581 - Release Date: 12/9/2006 > 3:41 PM > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > |