From: Joel D. <jr...@io...> - 2006-04-19 14:03:35
|
My old system was running FC4, and the driver built fine with that. You should be able to download the tarball from the moxa website. Joel On Wed, 19 Apr 2006, it would appear that Greg Satz wrote: > I couldn't get FC4 to see my MOXA C168H/PCI card either so I stayed with FC3. > I also tried making a new kernel but it never saw the card. > > Any clues would be appreciated. > > Thanks, > Greg > > On Apr 19, 2006, at 7:49 AM, Gaetan Lord wrote: > >> I did upgrade too FC5 over the week-end and got a lot of trouble with my >> Moxa card. >> I had to rebuild a new kernel. Many things change since 2.6.12. I had to >> patch the >> moxa.c source code to get it to work, and change some other kernel >> parameter. >> I did recompile the 2.6.16.5 kernel, and not it does work. >> >> When I was loading the module, ie "modprobe mxser", there was message about >> verbose >> while I was running the command "dmesg". >> >> here's my lspci output >> Serial controller: Moxa Technologies Co Ltd Smartio C168H/PCI (rev 01) >> >> >> Neil Cherry wrote: >>> Joel Davidson wrote: >>>> Neil- >>>> >>>> Were you able to get the driver for the moxa card to compile under FC5? >>>> I'm getting a string of errors, and moxa tech support confirmed that >>>> they have some work to do to get it working. Do you have a workaround? >>> >>> Yes I have it working under FC5. Which card do you have? Do a >>> lspci and post the results. I think I know how to patch the >>> problem code if it's the one I think it is. >>> |