Re: [mh] X10 signal question

[Gary K. <gk...@ca...>]

On Wed, 2006-01-25 at 16:46 -0800, J D wrote:
> OHHHH.  NOW I get it!
>=20
> See attached picture.
>=20
> So if I understand the way it's wired correctly, four breakers are on
> the left side on one phase, and four on the other phase on the right.=20
> It doesn't matter at all what devices are on what breaker, but rather
> what devices are on what phase, or what "side" of your 220 total volts
> of power.
>=20
> Terrific!
>=20
> Er.  But.  Now what?  :)
>=20
> J
The phases change by row not column.  The top 2 breakers (both left and
right) would be on phase 2, the next 2 down would be on phase 1, the
next 2 would be on phase 2 again, etc...  It is more apparent when you
look at a box without any breakers in it but you can get a glimpse of
what I mean by looking at the bottom of your picture at the exposed bus
bars. =20


--=20
Gary Keith
gk...@ca...