From: Tom <tom...@co...> - 2004-01-30 15:19:27
|
do you schedule periodic reboots of the Audrey to maintain network connectivity? It seems that I started having problems when I would use the audrey.pl code to do a ping check of the audrey and reboot if not response was received. It would turn off the x10 controlled outlet and turn it back on after about a minute.. network connectivity stays pretty stable, but I noticed that when the x10 outlet was off, the audrey would make a clicking noise like it was still getting a minimal amount of power and they may be messing up the modem. ----- Original Message ----- From: "Scott Johnston" <sc...@sc...> To: <mis...@li...> Sent: Tuesday, January 27, 2004 3:27 PM Subject: Re: [misterhouse-users] Audrey and CallerID revisted > On Mon, 2004-01-26 at 14:06, Tom wrote: > > The caller ID program which runs on the Audrey (ACID) can send CID > > info to MisterHouse and it works well when it works. The problem is > > the modem in the Audrey is flakey > > I haven't used YAC but, the Audrey CID, ACID and Misterhouse setup has > been very stable and reliable for me. Must be your particular unit has a > bad modem. > > > > Scott > > > > -- > sc...@li... > > Scott Johnston Inc. > www.limsguy.com > > > Your source for innovative software solutions and unique hardware > products for the automated laboratory. > > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > ________________________________________________________ > To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 > |