From: Bruce W. <br...@mi...> - 2003-05-24 23:59:38
|
> I'm running mh 2.80 on a windows 2000 box. I recently installed a > netcallerid module and put the following in my mh.ini file: > > # NetCallerID Box > callerid_port = COM1 > callerid_name = line 1 > callerid_type = netcallerid > callerid_format = (number only) > > When mh starts up, the callerid port is never created. > > I can create a serial port on com1 (serial3_port) but not a caller id > port. I have tried this on other com ports as well. > > Any idea what I am doing wrong? > > Thanks! Those look like the right parms, same as I have. Did you also enable the common/callerid.pl code? This code is a bit different from other serial port code in that the serial port is not opened until the user code is run, and by default there is not errata saying it is opened. If you run this: mh -debug phone You should see something like this in your console: 05/24/03 06:53:55 PM Calling Serial_match_add_hook Telephony_Interface port open: n=line 1 t=default p=COM3 b=38400 h=dtr - creating line 1 object on port COM3 Bruce |