[Madwifi-users] wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xc0 'Hardware didn
Status: Beta
Brought to you by:
otaku
Menu
▾
▴
[Madwifi-users] wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xc0 'Hardware didn't respond as expected' (HAL status 3)
|
From: Raghu R. <rag...@mi...> - 2010-04-28 06:27:31
|
Hi,
Details of my platform
Core :DM6467t-Davinci - ARM9
Linux : 2.6.32 / 2.6.18
Atheros : AR5414
Toolchain : arm_v5t_le-gcc (MontaVista 4.2.0-16.0.32.0801914 2008-08-30)
Madwifi : madwifi-hal-testing-r4126-20100324
madwifi-hal-0.10.5.6-current.tar.gz
Pls find the logs below....
What could be the problem?
root@172.22.66.12:~# cd /home/raghu/HAL/wifi/wifi_modules/
root@172.22.66.12:/home/raghu/HAL/wifi/wifi_modules# ./install.sh
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425,
RF2417, REGOPS_FUNC)
wlan: mac acl policy registered
in function __pci_register_driver
PCI: enabling device 0000:00:06.0 (0340 -> 0342)
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR5414 chip found (MAC 10.5, PHY SChip 6.1, Radio 6.3)
ath_pci: wifi0: Atheros 5413: mem=0x30080000, irq=49
in function __pci_register_driver after driver reg
in function __pci_register_driver after pci_create_newid_file
in function __pci_register_driver after pci_create_removeid_file
root@172.22.66.12:/home/raghu/HAL/wifi/wifi_modules#
root@172.22.66.12:/home/raghu/HAL/wifi/wifi_modules# iwconfig
iwconfig: Symbol `iw_operation_mode' has different size in shared objectnet eth0
: DaVinci EMAC: ioctl not supported
, consider re-linking
lo no wireless extensions.
eth0 no wireless extensions.
wifi0 no wireless extensions.
wlan0 IEEE 802.11b ESSID:"" Nickname:""
Mode:Managed Channel:0 Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power:0 dBm Sensitivity=1/1
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/70 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root@172.22.66.12:/home/raghu/HAL/wifi/wifi_modules# ifconfig wlan0 up
root@172.22.66.12:/home/raghu/HAL/wifi/wifi_modules# cd ..
root@172.22.66.12:/home/raghu/HAL/wifi# cd wifi_apps/
root@172.22.66.12:/home/raghu/HAL/wifi/wifi_apps# ./wlanconfig wlan0 list scann
root@172.22.66.12:/home/raghu/HAL/wifi/wifi_apps# wifi0: ath_chan_set: Unable to
reset channel 6 (2437 MHz) flags 0xc0 'Hardware didn't respond as expected' (HA
L status 3)
./wlanconfig wlan0 list scannwifi0: ath_chan_set: Unable to reset channel 7 (244
2 MHz) flags 0xc0 'Hardware didn't respond as expected' (HAL status 3)
wifi0: ath_chan_set: Unable to reset channel 56 (5280 MHz) flags 0x140 'Hardware
didn't respond as expected' (HAL status 3)
wifi0: ath_chan_set: Unable to reset channel 64 (5320 MHz) flags 0x140 'Hardware
didn't respond as expected' (HAL status 3)
Thanks & Regards,
Raghu Ramaraj
________________________________
http://www.mindtree.com/email/disclaimer.html
|