[Madwifi-cvs] revision 4030 committed
Status: Beta
Brought to you by:
otaku
Menu
▾
▴
[Madwifi-cvs] revision 4030 committed
|
From: Michael R. <svn...@ma...> - 2009-05-28 14:13:26
|
Project : madwifi Revision : 4030 Author : mrenzmann (Michael Renzmann) Date : 2009-05-28 15:42:07 +0200 (Thu, 28 May 2009) Log Message : Fix all references to old domain name. Affected Files: * madwifi/branches/madwifi-0.9.3/INSTALL updated * madwifi/branches/madwifi-0.9.3/README updated * madwifi/branches/madwifi-0.9.3/THANKS updated * madwifi/branches/madwifi-0.9.3/contrib/madwifi.spec.in updated * madwifi/branches/madwifi-0.9.3/scripts/make-release.bash updated * madwifi/branches/madwifi-0.9.3/tools/man/80211debug.8 updated * madwifi/branches/madwifi-0.9.3/tools/man/athdebug.8 updated * madwifi/branches/madwifi-0.9.3/tools/man/wlanconfig.8 updated * madwifi/branches/madwifi-0.9.4/INSTALL updated * madwifi/branches/madwifi-0.9.4/README updated * madwifi/branches/madwifi-0.9.4/THANKS updated * madwifi/branches/madwifi-0.9.4/ath_rate/minstrel/minstrel.txt updated * madwifi/branches/madwifi-0.9.4/contrib/madwifi.spec.in updated * madwifi/branches/madwifi-0.9.4/scripts/make-release.bash updated * madwifi/branches/madwifi-0.9.4/tools/man/80211debug.8 updated * madwifi/branches/madwifi-0.9.4/tools/man/athdebug.8 updated * madwifi/branches/madwifi-0.9.4/tools/man/wlanconfig.8 updated * madwifi/branches/madwifi-dfs/INSTALL updated * madwifi/branches/madwifi-dfs/README updated * madwifi/branches/madwifi-dfs/THANKS updated * madwifi/branches/madwifi-dfs/ath_rate/minstrel/minstrel.txt updated * madwifi/branches/madwifi-dfs/contrib/madwifi.spec.in updated * madwifi/branches/madwifi-dfs/scripts/make-release.bash updated * madwifi/branches/madwifi-dfs/tools/man/80211debug.8 updated * madwifi/branches/madwifi-dfs/tools/man/athdebug.8 updated * madwifi/branches/madwifi-dfs/tools/man/wlanconfig.8 updated * madwifi/branches/madwifi-dfs/tools/wpakey.c updated * madwifi/branches/madwifi-hal-0.10.5.6/INSTALL updated * madwifi/branches/madwifi-hal-0.10.5.6/README updated * madwifi/branches/madwifi-hal-0.10.5.6/THANKS updated * madwifi/branches/madwifi-hal-0.10.5.6/ath_rate/minstrel/minstrel.txt updated * madwifi/branches/madwifi-hal-0.10.5.6/contrib/madwifi.spec.in updated * madwifi/branches/madwifi-hal-0.10.5.6/scripts/make-release.bash updated * madwifi/branches/madwifi-hal-0.10.5.6/tools/man/80211debug.8 updated * madwifi/branches/madwifi-hal-0.10.5.6/tools/man/athdebug.8 updated * madwifi/branches/madwifi-hal-0.10.5.6/tools/man/wlanconfig.8 updated * madwifi/branches/madwifi-hal-0.10.5.6/tools/wpakey.c updated * madwifi/branches/madwifi-hal-0.9.30.13/INSTALL updated * madwifi/branches/madwifi-hal-0.9.30.13/README updated * madwifi/branches/madwifi-hal-0.9.30.13/THANKS updated * madwifi/branches/madwifi-hal-0.9.30.13/ath_rate/minstrel/minstrel.txt updated * madwifi/branches/madwifi-hal-0.9.30.13/contrib/madwifi.spec.in updated * madwifi/branches/madwifi-hal-0.9.30.13/scripts/make-release.bash updated * madwifi/branches/madwifi-hal-0.9.30.13/tools/man/80211debug.8 updated * madwifi/branches/madwifi-hal-0.9.30.13/tools/man/athdebug.8 updated * madwifi/branches/madwifi-hal-0.9.30.13/tools/man/wlanconfig.8 updated * madwifi/branches/madwifi-hal-0.9.30.13/tools/wpakey.c updated * madwifi/branches/madwifi-hal-testing/INSTALL updated * madwifi/branches/madwifi-hal-testing/README updated * madwifi/branches/madwifi-hal-testing/THANKS updated * madwifi/branches/madwifi-hal-testing/ath_rate/minstrel/minstrel.txt updated * madwifi/branches/madwifi-hal-testing/contrib/madwifi.spec.in updated * madwifi/branches/madwifi-hal-testing/scripts/make-release.bash updated * madwifi/branches/madwifi-hal-testing/tools/man/80211debug.8 updated * madwifi/branches/madwifi-hal-testing/tools/man/athdebug.8 updated * madwifi/branches/madwifi-hal-testing/tools/man/wlanconfig.8 updated * madwifi/branches/madwifi-hal-testing/tools/wpakey.c updated * madwifi/trunk/INSTALL updated * madwifi/trunk/README updated * madwifi/trunk/THANKS updated * madwifi/trunk/ath_rate/minstrel/minstrel.txt updated * madwifi/trunk/contrib/madwifi.spec.in updated * madwifi/trunk/scripts/make-release.bash updated * madwifi/trunk/tools/man/80211debug.8 updated * madwifi/trunk/tools/man/athdebug.8 updated * madwifi/trunk/tools/man/wlanconfig.8 updated * madwifi/trunk/tools/wpakey.c updated Modified: madwifi/branches/madwifi-0.9.3/INSTALL =================================================================== --- madwifi/branches/madwifi-0.9.3/INSTALL 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.3/INSTALL 2009-05-28 13:42:07 UTC (rev 4030) @@ -198,4 +198,4 @@ file README. In addition, the project's wiki has a lot of valuable information: -http://madwifi.org/ +http://madwifi-project.org/ Modified: madwifi/branches/madwifi-0.9.3/README =================================================================== --- madwifi/branches/madwifi-0.9.3/README 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.3/README 2009-05-28 13:42:07 UTC (rev 4030) @@ -64,7 +64,7 @@ you will see messages that your system is now "tainted". A detailed discussion of the pros and cons of this design can be found -at http://madwifi.org/wiki/HAL +at http://madwifi-project.org/wiki/HAL If you wish to use this driver on a platform for which an ath_hal module is not already provided please contact the author. Note that this is @@ -95,7 +95,7 @@ A list of products that have been reported to be supported by MadWifi can be found here: -http://madwifi.org/wiki/Compatibility +http://madwifi-project.org/wiki/Compatibility In general, if a device is identified as ``11a only'', it is almost certain to contain an Atheros 5210 part in it. Most retail a+b products @@ -167,7 +167,7 @@ modprobe ath_pci autocreate=none Please see the following link for more information: -http://madwifi.org/wiki/UserDocs/autocreate +http://madwifi-project.org/wiki/UserDocs/autocreate Virtual APs (VAPs) and wlanconfig @@ -253,7 +253,7 @@ By default the ath0 device is used; to override this use the -i option. A wiki page describes common MadWifi debugging methods here: -http://madwifi.org/wiki/DevDocs/AthDebug +http://madwifi-project.org/wiki/DevDocs/AthDebug Security/Crypto Support @@ -325,7 +325,7 @@ 1. Ad-hoc mode is broken; symptoms are intermittent operation. Other issues might be mentioned in our ticket tracker: -http://madwifi.org/report/1 +http://madwifi-project.org/report/1 Getting Support @@ -343,7 +343,7 @@ We also offer an IRC channel that might be a better help in urgent cases. Learn more about the different ways to get support by visiting: - http://madwifi.org/wiki/Support + http://madwifi-project.org/wiki/Support When sending a support request or problem report be sure to include the version of the driver and the part identification the driver prints to @@ -372,6 +372,6 @@ Reports about reproducible bugs, feature requests and patches should be submitted in the form of a trouble ticket: - http://madwifi.org/newticket + http://madwifi-project.org/wiki/TicketSubmissionGuidelines Fixes and enhancements are encouraged. Modified: madwifi/branches/madwifi-0.9.3/THANKS =================================================================== --- madwifi/branches/madwifi-0.9.3/THANKS 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.3/THANKS 2009-05-28 13:42:07 UTC (rev 4030) @@ -153,14 +153,14 @@ 1 Wistron DCMA-81 MiniPCI card * true global communications GmbH, Germany - http://www.tgc.de - Free server and bandwidth for madwifi.org + Free server and bandwidth for madwifi-project.org * Voyage, Hong Kong - htt://www.voyage.hk 1 Senao NMP-8602 Plus MiniPCI card, 2 pigtails and 2 rubber antenna To learn more about donations to our project visit: -http://madwifi.org/wiki/Donations +http://madwifi-project.org/wiki/Donations -If you want to support MadWifi this way, please contact: -Michael Renzmann <mre...@ot...> +If you want to support the project this way, please contact us by +e-mail at don...@ma.... Modified: madwifi/branches/madwifi-0.9.3/contrib/madwifi.spec.in =================================================================== --- madwifi/branches/madwifi-0.9.3/contrib/madwifi.spec.in 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.3/contrib/madwifi.spec.in 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,10 +20,10 @@ Release: 6 License: GPL2 Group: System Environment/Kernel -URL: http://madwifi.org -#Source0: http://snapshots.madwifi.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz +URL: http://madwifi-project.org +#Source0: http://snapshots.madwifi-project.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz # Changes accordingly to the new rule : madwifi-ng-r<revision>-<generation date>.tar.gz -Source0: http://snapshots.madwifi.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz +Source0: http://snapshots.madwifi-project.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root Requires: /sbin/depmod Requires: %{name}-module >= %{version} @@ -129,6 +129,9 @@ # %changelog +* Thu May 28 2009 Michael Renzmann <mre...@ma...> +- Update references to project website with new domain + * Wed Dec 14 2005 Patrick Pichon <Pat...@la...> - Update accordingly to the new file name rule: madwifi-ng-r<revision>-<generation date>.tar.gz - 'branch' tag is not use yet. 'ng' is hardcoded as part of the file name Modified: madwifi/branches/madwifi-0.9.3/scripts/make-release.bash =================================================================== --- madwifi/branches/madwifi-0.9.3/scripts/make-release.bash 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.3/scripts/make-release.bash 2009-05-28 13:42:07 UTC (rev 4030) @@ -23,7 +23,7 @@ exit 1 fi -# caller must have write access to the madwifi.org repository +# caller must have write access to the madwifi-project.org repository valid=0 repos=$(svn info | grep "Repository Root" | cut -d" " -f3) for f in ~/.subversion/auth/svn.simple/*; do Modified: madwifi/branches/madwifi-0.9.3/tools/man/80211debug.8 =================================================================== --- madwifi/branches/madwifi-0.9.3/tools/man/80211debug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.3/tools/man/80211debug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -115,7 +115,7 @@ Disable state bitmap for ath0. .PP .SH "SEE ALSO" -\fBathdebug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fBathdebug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-0.9.3/tools/man/athdebug.8 =================================================================== --- madwifi/branches/madwifi-0.9.3/tools/man/athdebug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.3/tools/man/athdebug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -94,7 +94,7 @@ Clear rate bitmap on wifi0. .PP .SH "SEE ALSO" -\fB80211debug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fB80211debug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-0.9.3/tools/man/wlanconfig.8 =================================================================== --- madwifi/branches/madwifi-0.9.3/tools/man/wlanconfig.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.3/tools/man/wlanconfig.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -124,7 +124,7 @@ .RS 0 \fBifconfig br0 up .RS 7 -\fRCreate a WDS bridge. See http://madwifi.org/ for more information. +\fRCreate a WDS bridge. See http://madwifi-project.org/ for more information. .RS -7 .PP .SH "AUTHOR" Modified: madwifi/branches/madwifi-0.9.4/INSTALL =================================================================== --- madwifi/branches/madwifi-0.9.4/INSTALL 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/INSTALL 2009-05-28 13:42:07 UTC (rev 4030) @@ -199,4 +199,4 @@ file README. In addition, the project's wiki has a lot of valuable information: -http://madwifi.org/ +http://madwifi-project.org/ Modified: madwifi/branches/madwifi-0.9.4/README =================================================================== --- madwifi/branches/madwifi-0.9.4/README 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/README 2009-05-28 13:42:07 UTC (rev 4030) @@ -64,7 +64,7 @@ you will see messages that your system is now "tainted". A detailed discussion of the pros and cons of this design can be found -at http://madwifi.org/wiki/HAL +at http://madwifi-project.org/wiki/HAL If you wish to use this driver on a platform for which an ath_hal module is not already provided please contact the author. Note that this is @@ -95,7 +95,7 @@ A list of products that have been reported to be supported by MadWifi can be found here: -http://madwifi.org/wiki/Compatibility +http://madwifi-project.org/wiki/Compatibility In general, if a device is identified as ``11a only'', it is almost certain to contain an Atheros 5210 part in it. Most retail a+b products @@ -167,7 +167,7 @@ modprobe ath_pci autocreate=none Please see the following link for more information: -http://madwifi.org/wiki/UserDocs/autocreate +http://madwifi-project.org/wiki/UserDocs/autocreate Virtual APs (VAPs) and wlanconfig @@ -253,7 +253,7 @@ By default the ath0 device is used; to override this use the -i option. A wiki page describes common MadWifi debugging methods here: -http://madwifi.org/wiki/DevDocs/AthDebug +http://madwifi-project.org/wiki/DevDocs/AthDebug Security/Crypto Support @@ -325,7 +325,7 @@ 1. Ad-hoc mode is broken; symptoms are intermittent operation. Other issues might be mentioned in our ticket tracker: -http://madwifi.org/report/1 +http://madwifi-project.org/report/1 Getting Support @@ -343,7 +343,7 @@ We also offer an IRC channel that might be a better help in urgent cases. Learn more about the different ways to get support by visiting: - http://madwifi.org/wiki/Support + http://madwifi-project.org/wiki/Support When sending a support request or problem report be sure to include the version of the driver and the part identification the driver prints to @@ -372,6 +372,6 @@ Reports about reproducible bugs, feature requests and patches should be submitted in the form of a trouble ticket: - http://madwifi.org/newticket + http://madwifi-project.org/wiki/TicketSubmissionGuidelines Fixes and enhancements are encouraged. Modified: madwifi/branches/madwifi-0.9.4/THANKS =================================================================== --- madwifi/branches/madwifi-0.9.4/THANKS 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/THANKS 2009-05-28 13:42:07 UTC (rev 4030) @@ -154,14 +154,14 @@ 1 Wistron DCMA-81 MiniPCI card * true global communications GmbH, Germany - http://www.tgc.de - Free server and bandwidth for madwifi.org + Free server and bandwidth for madwifi-project.org * Voyage, Hong Kong - htt://www.voyage.hk 1 Senao NMP-8602 Plus MiniPCI card, 2 pigtails and 2 rubber antenna To learn more about donations to our project visit: -http://madwifi.org/wiki/Donations +http://madwifi-project.org/wiki/Donations -If you want to support MadWifi this way, please contact: -Michael Renzmann <mre...@ot...> +If you want to support the project this way, please contact us by +e-mail at don...@ma.... Modified: madwifi/branches/madwifi-0.9.4/ath_rate/minstrel/minstrel.txt =================================================================== --- madwifi/branches/madwifi-0.9.4/ath_rate/minstrel/minstrel.txt 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/ath_rate/minstrel/minstrel.txt 2009-05-28 13:42:07 UTC (rev 4030) @@ -19,7 +19,7 @@ The code released in 2005 had some algorithmic and implementation flaws (one of which was that it was based on the old madwifi codebase) and was shown to be unstable. Performance of the sample module is poor -(http://www.madwifi.org/ticket/989), and we have observed similar +(http://www.madwifi-project.org/ticket/989), and we have observed similar issues. We noted: Modified: madwifi/branches/madwifi-0.9.4/contrib/madwifi.spec.in =================================================================== --- madwifi/branches/madwifi-0.9.4/contrib/madwifi.spec.in 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/contrib/madwifi.spec.in 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,10 +20,10 @@ Release: 6 License: GPL2 Group: System Environment/Kernel -URL: http://madwifi.org -#Source0: http://snapshots.madwifi.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz +URL: http://madwifi-project.org +#Source0: http://snapshots.madwifi-project.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz # Changes accordingly to the new rule : madwifi-ng-r<revision>-<generation date>.tar.gz -Source0: http://snapshots.madwifi.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz +Source0: http://snapshots.madwifi-project.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root Requires: /sbin/depmod Requires: %{name}-module >= %{version} @@ -128,6 +128,9 @@ # %changelog +* Thu May 28 2009 Michael Renzmann <mre...@ma...> +- Update references to project website with new domain + * Wed Dec 14 2005 Patrick Pichon <Pat...@la...> - Update accordingly to the new file name rule: madwifi-ng-r<revision>-<generation date>.tar.gz - 'branch' tag is not use yet. 'ng' is hardcoded as part of the file name Modified: madwifi/branches/madwifi-0.9.4/scripts/make-release.bash =================================================================== --- madwifi/branches/madwifi-0.9.4/scripts/make-release.bash 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/scripts/make-release.bash 2009-05-28 13:42:07 UTC (rev 4030) @@ -49,7 +49,7 @@ check_dir_prereq "RELEASE_TMP" check_dir_prereq "RELEASE_STORE" -# caller must have write access to the madwifi.org repository +# caller must have write access to the madwifi-project.org repository valid=0 repos=$(svn info | grep "Repository Root" | cut -d" " -f3) for f in ~/.subversion/auth/svn.simple/*; do Modified: madwifi/branches/madwifi-0.9.4/tools/man/80211debug.8 =================================================================== --- madwifi/branches/madwifi-0.9.4/tools/man/80211debug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/tools/man/80211debug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -115,7 +115,7 @@ Disable state bitmap for ath0. .PP .SH "SEE ALSO" -\fBathdebug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fBathdebug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-0.9.4/tools/man/athdebug.8 =================================================================== --- madwifi/branches/madwifi-0.9.4/tools/man/athdebug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/tools/man/athdebug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -94,7 +94,7 @@ Clear rate bitmap on wifi0. .PP .SH "SEE ALSO" -\fB80211debug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fB80211debug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-0.9.4/tools/man/wlanconfig.8 =================================================================== --- madwifi/branches/madwifi-0.9.4/tools/man/wlanconfig.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-0.9.4/tools/man/wlanconfig.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -124,7 +124,7 @@ .RS 0 \fBifconfig br0 up .RS 7 -\fRCreate a WDS bridge. See http://madwifi.org/ for more information. +\fRCreate a WDS bridge. See http://madwifi-project.org/ for more information. .RS -7 .PP .SH "AUTHOR" Modified: madwifi/branches/madwifi-dfs/INSTALL =================================================================== --- madwifi/branches/madwifi-dfs/INSTALL 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/INSTALL 2009-05-28 13:42:07 UTC (rev 4030) @@ -181,4 +181,4 @@ file README. In addition, the project's wiki has a lot of valuable information: -http://madwifi.org/ +http://madwifi-project.org/ Modified: madwifi/branches/madwifi-dfs/README =================================================================== --- madwifi/branches/madwifi-dfs/README 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/README 2009-05-28 13:42:07 UTC (rev 4030) @@ -64,7 +64,7 @@ you will see messages that your system is now "tainted". A detailed discussion of the pros and cons of this design can be found -at http://madwifi.org/wiki/HAL +at http://madwifi-project.org/wiki/HAL If you wish to use this driver on a platform for which an ath_hal module is not already provided please contact the author. Note that this is @@ -95,7 +95,7 @@ A list of products that have been reported to be supported by MadWifi can be found here: -http://madwifi.org/wiki/Compatibility +http://madwifi-project.org/wiki/Compatibility In general, if a device is identified as ``11a only'', it is almost certain to contain an Atheros 5210 part in it. Most retail a+b products @@ -167,7 +167,7 @@ modprobe ath_pci autocreate=none Please see the following link for more information: -http://madwifi.org/wiki/UserDocs/autocreate +http://madwifi-project.org/wiki/UserDocs/autocreate Virtual APs (VAPs) and wlanconfig @@ -257,7 +257,7 @@ By default the ath0 device is used; to override this use the -i option. A wiki page describes common MadWifi debugging methods here: -http://madwifi.org/wiki/DevDocs/AthDebug +http://madwifi-project.org/wiki/DevDocs/AthDebug Security/Crypto Support @@ -329,7 +329,7 @@ 1. Ad-hoc mode is broken; symptoms are intermittent operation. Other issues might be mentioned in our ticket tracker: -http://madwifi.org/report/1 +http://madwifi-project.org/report/1 Getting Support @@ -347,7 +347,7 @@ We also offer an IRC channel that might be a better help in urgent cases. Learn more about the different ways to get support by visiting: - http://madwifi.org/wiki/Support + http://madwifi-project.org/wiki/Support When sending a support request or problem report be sure to include the version of the driver and the part identification the driver prints to @@ -376,6 +376,6 @@ Reports about reproducible bugs, feature requests and patches should be submitted in the form of a trouble ticket: - http://madwifi.org/newticket + http://madwifi-project.org/wiki/TicketSubmissionGuidelines Fixes and enhancements are encouraged. Modified: madwifi/branches/madwifi-dfs/THANKS =================================================================== --- madwifi/branches/madwifi-dfs/THANKS 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/THANKS 2009-05-28 13:42:07 UTC (rev 4030) @@ -168,14 +168,14 @@ 1 Wistron DCMA-81 MiniPCI card * true global communications GmbH, Germany - http://www.tgc.de - Free server and bandwidth for madwifi.org + Free server and bandwidth for madwifi-project.org * Voyage, Hong Kong - htt://www.voyage.hk 1 Senao NMP-8602 Plus MiniPCI card, 2 pigtails and 2 rubber antenna To learn more about donations to our project visit: -http://madwifi.org/wiki/Donations +http://madwifi-project.org/wiki/Donations If you want to support the project this way, please contact us by -e-mail at don...@ma.... +e-mail at don...@ma.... Modified: madwifi/branches/madwifi-dfs/ath_rate/minstrel/minstrel.txt =================================================================== --- madwifi/branches/madwifi-dfs/ath_rate/minstrel/minstrel.txt 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/ath_rate/minstrel/minstrel.txt 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,7 +20,8 @@ The code released in 2005 had some algorithmic and implementation flaws (one of which was that it was based on the old madwifi codebase) and was shown to be unstable. Performance of the sample module is poor -(http://www.madwifi.org/ticket/989), and we have observed similar issues. +(http://www.madwifi-project.org/ticket/989), and we have observed similar +issues. We noted: Modified: madwifi/branches/madwifi-dfs/contrib/madwifi.spec.in =================================================================== --- madwifi/branches/madwifi-dfs/contrib/madwifi.spec.in 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/contrib/madwifi.spec.in 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,10 +20,10 @@ Release: 6 License: GPL2 Group: System Environment/Kernel -URL: http://madwifi.org -#Source0: http://snapshots.madwifi.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz +URL: http://madwifi-project.org +#Source0: http://snapshots.madwifi-project.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz # Changes accordingly to the new rule : madwifi-ng-r<revision>-<generation date>.tar.gz -Source0: http://snapshots.madwifi.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz +Source0: http://snapshots.madwifi-project.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root Requires: /sbin/depmod Requires: %{name}-module >= %{version} @@ -128,6 +128,9 @@ # %changelog +* Thu May 28 2009 Michael Renzmann <mre...@ma...> +- Update references to project website with new domain + * Wed Dec 14 2005 Patrick Pichon <Pat...@la...> - Update accordingly to the new file name rule: madwifi-ng-r<revision>-<generation date>.tar.gz - 'branch' tag is not use yet. 'ng' is hardcoded as part of the file name Modified: madwifi/branches/madwifi-dfs/scripts/make-release.bash =================================================================== --- madwifi/branches/madwifi-dfs/scripts/make-release.bash 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/scripts/make-release.bash 2009-05-28 13:42:07 UTC (rev 4030) @@ -49,7 +49,7 @@ check_dir_prereq "RELEASE_TMP" check_dir_prereq "RELEASE_STORE" -# caller must have write access to the madwifi.org repository +# caller must have write access to the madwifi-project.org repository valid=0 repos=$(svn info | grep "Repository Root" | cut -d" " -f3) for f in ~/.subversion/auth/svn.simple/*; do Modified: madwifi/branches/madwifi-dfs/tools/man/80211debug.8 =================================================================== --- madwifi/branches/madwifi-dfs/tools/man/80211debug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/tools/man/80211debug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -115,7 +115,7 @@ Disable state bitmap for ath0. .PP .SH "SEE ALSO" -\fBathdebug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fBathdebug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-dfs/tools/man/athdebug.8 =================================================================== --- madwifi/branches/madwifi-dfs/tools/man/athdebug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/tools/man/athdebug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -94,7 +94,7 @@ Clear rate bitmap on wifi0. .PP .SH "SEE ALSO" -\fB80211debug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fB80211debug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-dfs/tools/man/wlanconfig.8 =================================================================== --- madwifi/branches/madwifi-dfs/tools/man/wlanconfig.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/tools/man/wlanconfig.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -127,7 +127,7 @@ .RS 0 \fBifconfig br0 up .RS 7 -\fRCreate a WDS bridge. See http://madwifi.org/ for more information. +\fRCreate a WDS bridge. See http://madwifi-project.org/ for more information. .RS -7 .PP .SH "AUTHOR" Modified: madwifi/branches/madwifi-dfs/tools/wpakey.c =================================================================== --- madwifi/branches/madwifi-dfs/tools/wpakey.c 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-dfs/tools/wpakey.c 2009-05-28 13:42:07 UTC (rev 4030) @@ -1,6 +1,6 @@ /** WEP/WPA key setting tool for MadWifi driver, version 0.5 * - * (C) 2008-03-28 Georg Lukas <ge...@ma...> + * (C) 2008-03-28 Georg Lukas <ge...@ma...> * * This program can be used to debug the MadWifi Key Cache. Use with caution * and without warranty! Modified: madwifi/branches/madwifi-hal-0.10.5.6/INSTALL =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/INSTALL 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/INSTALL 2009-05-28 13:42:07 UTC (rev 4030) @@ -208,4 +208,4 @@ file README. In addition, the project's wiki has a lot of valuable information: -http://madwifi.org/ +http://madwifi-project.org/ Modified: madwifi/branches/madwifi-hal-0.10.5.6/README =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/README 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/README 2009-05-28 13:42:07 UTC (rev 4030) @@ -64,7 +64,7 @@ you will see messages that your system is now "tainted". A detailed discussion of the pros and cons of this design can be found -at http://madwifi.org/wiki/HAL +at http://madwifi-project.org/wiki/HAL If you wish to use this driver on a platform for which an ath_hal module is not already provided please contact the author. Note that this is @@ -95,7 +95,7 @@ A list of products that have been reported to be supported by MadWifi can be found here: -http://madwifi.org/wiki/Compatibility +http://madwifi-project.org/wiki/Compatibility In general, if a device is identified as ``11a only'', it is almost certain to contain an Atheros 5210 part in it. Most retail a+b products @@ -167,7 +167,7 @@ modprobe ath_pci autocreate=none Please see the following link for more information: -http://madwifi.org/wiki/UserDocs/autocreate +http://madwifi-project.org/wiki/UserDocs/autocreate Virtual APs (VAPs) and wlanconfig @@ -257,7 +257,7 @@ By default the ath0 device is used; to override this use the -i option. A wiki page describes common MadWifi debugging methods here: -http://madwifi.org/wiki/DevDocs/AthDebug +http://madwifi-project.org/wiki/DevDocs/AthDebug Security/Crypto Support @@ -329,7 +329,7 @@ 1. Ad-hoc mode is broken; symptoms are intermittent operation. Other issues might be mentioned in our ticket tracker: -http://madwifi.org/report/1 +http://madwifi-project.org/report/1 Getting Support @@ -347,7 +347,7 @@ We also offer an IRC channel that might be a better help in urgent cases. Learn more about the different ways to get support by visiting: - http://madwifi.org/wiki/Support + http://madwifi-project.org/wiki/Support When sending a support request or problem report be sure to include the version of the driver and the part identification the driver prints to @@ -376,6 +376,6 @@ Reports about reproducible bugs, feature requests and patches should be submitted in the form of a trouble ticket: - http://madwifi.org/newticket + http://madwifi-project.org/wiki/TicketSubmissionGuidelines Fixes and enhancements are encouraged. Modified: madwifi/branches/madwifi-hal-0.10.5.6/THANKS =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/THANKS 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/THANKS 2009-05-28 13:42:07 UTC (rev 4030) @@ -168,14 +168,14 @@ 1 Wistron DCMA-81 MiniPCI card * true global communications GmbH, Germany - http://www.tgc.de - Free server and bandwidth for madwifi.org + Free server and bandwidth for madwifi-project.org * Voyage, Hong Kong - htt://www.voyage.hk 1 Senao NMP-8602 Plus MiniPCI card, 2 pigtails and 2 rubber antenna To learn more about donations to our project visit: -http://madwifi.org/wiki/Donations +http://madwifi-project.org/wiki/Donations If you want to support the project this way, please contact us by -e-mail at don...@ma.... +e-mail at don...@ma.... Modified: madwifi/branches/madwifi-hal-0.10.5.6/ath_rate/minstrel/minstrel.txt =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/ath_rate/minstrel/minstrel.txt 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/ath_rate/minstrel/minstrel.txt 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,7 +20,8 @@ The code released in 2005 had some algorithmic and implementation flaws (one of which was that it was based on the old madwifi codebase) and was shown to be unstable. Performance of the sample module is poor -(http://www.madwifi.org/ticket/989), and we have observed similar issues. +(http://www.madwifi-project.org/ticket/989), and we have observed similar +issues. We noted: Modified: madwifi/branches/madwifi-hal-0.10.5.6/contrib/madwifi.spec.in =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/contrib/madwifi.spec.in 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/contrib/madwifi.spec.in 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,10 +20,10 @@ Release: 6 License: GPL2 Group: System Environment/Kernel -URL: http://madwifi.org -#Source0: http://snapshots.madwifi.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz +URL: http://madwifi-project.org +#Source0: http://snapshots.madwifi-project.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz # Changes accordingly to the new rule : madwifi-ng-r<revision>-<generation date>.tar.gz -Source0: http://snapshots.madwifi.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz +Source0: http://snapshots.madwifi-project.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root Requires: /sbin/depmod Requires: %{name}-module >= %{version} @@ -128,6 +128,9 @@ # %changelog +* Thu May 28 2009 Michael Renzmann <mre...@ma...> +- Update references to project website with new domain + * Wed Dec 14 2005 Patrick Pichon <Pat...@la...> - Update accordingly to the new file name rule: madwifi-ng-r<revision>-<generation date>.tar.gz - 'branch' tag is not use yet. 'ng' is hardcoded as part of the file name Modified: madwifi/branches/madwifi-hal-0.10.5.6/scripts/make-release.bash =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/scripts/make-release.bash 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/scripts/make-release.bash 2009-05-28 13:42:07 UTC (rev 4030) @@ -49,7 +49,7 @@ check_dir_prereq "RELEASE_TMP" check_dir_prereq "RELEASE_STORE" -# caller must have write access to the madwifi.org repository +# caller must have write access to the madwifi-project.org repository valid=0 repos=$(svn info | grep "Repository Root" | cut -d" " -f3) for f in ~/.subversion/auth/svn.simple/*; do Modified: madwifi/branches/madwifi-hal-0.10.5.6/tools/man/80211debug.8 =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/tools/man/80211debug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/tools/man/80211debug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -115,7 +115,7 @@ Disable state bitmap for ath0. .PP .SH "SEE ALSO" -\fBathdebug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fBathdebug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-hal-0.10.5.6/tools/man/athdebug.8 =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/tools/man/athdebug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/tools/man/athdebug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -94,7 +94,7 @@ Clear rate bitmap on wifi0. .PP .SH "SEE ALSO" -\fB80211debug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fB80211debug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-hal-0.10.5.6/tools/man/wlanconfig.8 =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/tools/man/wlanconfig.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/tools/man/wlanconfig.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -127,7 +127,7 @@ .RS 0 \fBifconfig br0 up .RS 7 -\fRCreate a WDS bridge. See http://madwifi.org/ for more information. +\fRCreate a WDS bridge. See http://madwifi-project.org/ for more information. .RS -7 .PP .SH "AUTHOR" Modified: madwifi/branches/madwifi-hal-0.10.5.6/tools/wpakey.c =================================================================== --- madwifi/branches/madwifi-hal-0.10.5.6/tools/wpakey.c 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.10.5.6/tools/wpakey.c 2009-05-28 13:42:07 UTC (rev 4030) @@ -1,6 +1,6 @@ /** WEP/WPA key setting tool for MadWifi driver, version 0.5 * - * (C) 2008-03-28 Georg Lukas <ge...@ma...> + * (C) 2008-03-28 Georg Lukas <ge...@ma...> * * This program can be used to debug the MadWifi Key Cache. Use with caution * and without warranty! Modified: madwifi/branches/madwifi-hal-0.9.30.13/INSTALL =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/INSTALL 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/INSTALL 2009-05-28 13:42:07 UTC (rev 4030) @@ -208,4 +208,4 @@ file README. In addition, the project's wiki has a lot of valuable information: -http://madwifi.org/ +http://madwifi-project.org/ Modified: madwifi/branches/madwifi-hal-0.9.30.13/README =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/README 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/README 2009-05-28 13:42:07 UTC (rev 4030) @@ -64,7 +64,7 @@ you will see messages that your system is now "tainted". A detailed discussion of the pros and cons of this design can be found -at http://madwifi.org/wiki/HAL +at http://madwifi-project.org/wiki/HAL If you wish to use this driver on a platform for which an ath_hal module is not already provided please contact the author. Note that this is @@ -95,7 +95,7 @@ A list of products that have been reported to be supported by MadWifi can be found here: -http://madwifi.org/wiki/Compatibility +http://madwifi-project.org/wiki/Compatibility In general, if a device is identified as ``11a only'', it is almost certain to contain an Atheros 5210 part in it. Most retail a+b products @@ -167,7 +167,7 @@ modprobe ath_pci autocreate=none Please see the following link for more information: -http://madwifi.org/wiki/UserDocs/autocreate +http://madwifi-project.org/wiki/UserDocs/autocreate Virtual APs (VAPs) and wlanconfig @@ -257,7 +257,7 @@ By default the ath0 device is used; to override this use the -i option. A wiki page describes common MadWifi debugging methods here: -http://madwifi.org/wiki/DevDocs/AthDebug +http://madwifi-project.org/wiki/DevDocs/AthDebug Security/Crypto Support @@ -329,7 +329,7 @@ 1. Ad-hoc mode is broken; symptoms are intermittent operation. Other issues might be mentioned in our ticket tracker: -http://madwifi.org/report/1 +http://madwifi-project.org/report/1 Getting Support @@ -347,7 +347,7 @@ We also offer an IRC channel that might be a better help in urgent cases. Learn more about the different ways to get support by visiting: - http://madwifi.org/wiki/Support + http://madwifi-project.org/wiki/Support When sending a support request or problem report be sure to include the version of the driver and the part identification the driver prints to @@ -376,6 +376,6 @@ Reports about reproducible bugs, feature requests and patches should be submitted in the form of a trouble ticket: - http://madwifi.org/newticket + http://madwifi-project.org/wiki/TicketSubmissionGuidelines Fixes and enhancements are encouraged. Modified: madwifi/branches/madwifi-hal-0.9.30.13/THANKS =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/THANKS 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/THANKS 2009-05-28 13:42:07 UTC (rev 4030) @@ -168,14 +168,14 @@ 1 Wistron DCMA-81 MiniPCI card * true global communications GmbH, Germany - http://www.tgc.de - Free server and bandwidth for madwifi.org + Free server and bandwidth for madwifi-project.org * Voyage, Hong Kong - htt://www.voyage.hk 1 Senao NMP-8602 Plus MiniPCI card, 2 pigtails and 2 rubber antenna To learn more about donations to our project visit: -http://madwifi.org/wiki/Donations +http://madwifi-project.org/wiki/Donations If you want to support the project this way, please contact us by -e-mail at don...@ma.... +e-mail at don...@ma.... Modified: madwifi/branches/madwifi-hal-0.9.30.13/ath_rate/minstrel/minstrel.txt =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/ath_rate/minstrel/minstrel.txt 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/ath_rate/minstrel/minstrel.txt 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,7 +20,8 @@ The code released in 2005 had some algorithmic and implementation flaws (one of which was that it was based on the old madwifi codebase) and was shown to be unstable. Performance of the sample module is poor -(http://www.madwifi.org/ticket/989), and we have observed similar issues. +(http://www.madwifi-project.org/ticket/989), and we have observed similar +issues. We noted: Modified: madwifi/branches/madwifi-hal-0.9.30.13/contrib/madwifi.spec.in =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/contrib/madwifi.spec.in 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/contrib/madwifi.spec.in 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,10 +20,10 @@ Release: 6 License: GPL2 Group: System Environment/Kernel -URL: http://madwifi.org -#Source0: http://snapshots.madwifi.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz +URL: http://madwifi-project.org +#Source0: http://snapshots.madwifi-project.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz # Changes accordingly to the new rule : madwifi-ng-r<revision>-<generation date>.tar.gz -Source0: http://snapshots.madwifi.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz +Source0: http://snapshots.madwifi-project.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root Requires: /sbin/depmod Requires: %{name}-module >= %{version} @@ -128,6 +128,9 @@ # %changelog +* Thu May 28 2009 Michael Renzmann <mre...@ma...> +- Update references to project website with new domain + * Wed Dec 14 2005 Patrick Pichon <Pat...@la...> - Update accordingly to the new file name rule: madwifi-ng-r<revision>-<generation date>.tar.gz - 'branch' tag is not use yet. 'ng' is hardcoded as part of the file name Modified: madwifi/branches/madwifi-hal-0.9.30.13/scripts/make-release.bash =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/scripts/make-release.bash 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/scripts/make-release.bash 2009-05-28 13:42:07 UTC (rev 4030) @@ -49,7 +49,7 @@ check_dir_prereq "RELEASE_TMP" check_dir_prereq "RELEASE_STORE" -# caller must have write access to the madwifi.org repository +# caller must have write access to the madwifi-project.org repository valid=0 repos=$(svn info | grep "Repository Root" | cut -d" " -f3) for f in ~/.subversion/auth/svn.simple/*; do Modified: madwifi/branches/madwifi-hal-0.9.30.13/tools/man/80211debug.8 =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/tools/man/80211debug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/tools/man/80211debug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -115,7 +115,7 @@ Disable state bitmap for ath0. .PP .SH "SEE ALSO" -\fBathdebug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fBathdebug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-hal-0.9.30.13/tools/man/athdebug.8 =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/tools/man/athdebug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/tools/man/athdebug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -94,7 +94,7 @@ Clear rate bitmap on wifi0. .PP .SH "SEE ALSO" -\fB80211debug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fB80211debug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-hal-0.9.30.13/tools/man/wlanconfig.8 =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/tools/man/wlanconfig.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/tools/man/wlanconfig.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -127,7 +127,7 @@ .RS 0 \fBifconfig br0 up .RS 7 -\fRCreate a WDS bridge. See http://madwifi.org/ for more information. +\fRCreate a WDS bridge. See http://madwifi-project.org/ for more information. .RS -7 .PP .SH "AUTHOR" Modified: madwifi/branches/madwifi-hal-0.9.30.13/tools/wpakey.c =================================================================== --- madwifi/branches/madwifi-hal-0.9.30.13/tools/wpakey.c 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-0.9.30.13/tools/wpakey.c 2009-05-28 13:42:07 UTC (rev 4030) @@ -1,6 +1,6 @@ /** WEP/WPA key setting tool for MadWifi driver, version 0.5 * - * (C) 2008-03-28 Georg Lukas <ge...@ma...> + * (C) 2008-03-28 Georg Lukas <ge...@ma...> * * This program can be used to debug the MadWifi Key Cache. Use with caution * and without warranty! Modified: madwifi/branches/madwifi-hal-testing/INSTALL =================================================================== --- madwifi/branches/madwifi-hal-testing/INSTALL 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/INSTALL 2009-05-28 13:42:07 UTC (rev 4030) @@ -208,4 +208,4 @@ file README. In addition, the project's wiki has a lot of valuable information: -http://madwifi.org/ +http://madwifi-project.org/ Modified: madwifi/branches/madwifi-hal-testing/README =================================================================== --- madwifi/branches/madwifi-hal-testing/README 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/README 2009-05-28 13:42:07 UTC (rev 4030) @@ -64,7 +64,7 @@ you will see messages that your system is now "tainted". A detailed discussion of the pros and cons of this design can be found -at http://madwifi.org/wiki/HAL +at http://madwifi-project.org/wiki/HAL If you wish to use this driver on a platform for which an ath_hal module is not already provided please contact the author. Note that this is @@ -95,7 +95,7 @@ A list of products that have been reported to be supported by MadWifi can be found here: -http://madwifi.org/wiki/Compatibility +http://madwifi-project.org/wiki/Compatibility In general, if a device is identified as ``11a only'', it is almost certain to contain an Atheros 5210 part in it. Most retail a+b products @@ -167,7 +167,7 @@ modprobe ath_pci autocreate=none Please see the following link for more information: -http://madwifi.org/wiki/UserDocs/autocreate +http://madwifi-project.org/wiki/UserDocs/autocreate Virtual APs (VAPs) and wlanconfig @@ -257,7 +257,7 @@ By default the ath0 device is used; to override this use the -i option. A wiki page describes common MadWifi debugging methods here: -http://madwifi.org/wiki/DevDocs/AthDebug +http://madwifi-project.org/wiki/DevDocs/AthDebug Security/Crypto Support @@ -329,7 +329,7 @@ 1. Ad-hoc mode is broken; symptoms are intermittent operation. Other issues might be mentioned in our ticket tracker: -http://madwifi.org/report/1 +http://madwifi-project.org/report/1 Getting Support @@ -347,7 +347,7 @@ We also offer an IRC channel that might be a better help in urgent cases. Learn more about the different ways to get support by visiting: - http://madwifi.org/wiki/Support + http://madwifi-project.org/wiki/Support When sending a support request or problem report be sure to include the version of the driver and the part identification the driver prints to @@ -376,6 +376,6 @@ Reports about reproducible bugs, feature requests and patches should be submitted in the form of a trouble ticket: - http://madwifi.org/newticket + http://madwifi-project.org/wiki/TicketSubmissionGuidelines Fixes and enhancements are encouraged. Modified: madwifi/branches/madwifi-hal-testing/THANKS =================================================================== --- madwifi/branches/madwifi-hal-testing/THANKS 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/THANKS 2009-05-28 13:42:07 UTC (rev 4030) @@ -168,14 +168,14 @@ 1 Wistron DCMA-81 MiniPCI card * true global communications GmbH, Germany - http://www.tgc.de - Free server and bandwidth for madwifi.org + Free server and bandwidth for madwifi-project.org * Voyage, Hong Kong - htt://www.voyage.hk 1 Senao NMP-8602 Plus MiniPCI card, 2 pigtails and 2 rubber antenna To learn more about donations to our project visit: -http://madwifi.org/wiki/Donations +http://madwifi-project.org/wiki/Donations If you want to support the project this way, please contact us by -e-mail at don...@ma.... +e-mail at don...@ma.... Modified: madwifi/branches/madwifi-hal-testing/ath_rate/minstrel/minstrel.txt =================================================================== --- madwifi/branches/madwifi-hal-testing/ath_rate/minstrel/minstrel.txt 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/ath_rate/minstrel/minstrel.txt 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,7 +20,8 @@ The code released in 2005 had some algorithmic and implementation flaws (one of which was that it was based on the old madwifi codebase) and was shown to be unstable. Performance of the sample module is poor -(http://www.madwifi.org/ticket/989), and we have observed similar issues. +(http://www.madwifi-project.org/ticket/989), and we have observed similar +issues. We noted: Modified: madwifi/branches/madwifi-hal-testing/contrib/madwifi.spec.in =================================================================== --- madwifi/branches/madwifi-hal-testing/contrib/madwifi.spec.in 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/contrib/madwifi.spec.in 2009-05-28 13:42:07 UTC (rev 4030) @@ -20,10 +20,10 @@ Release: 6 License: GPL2 Group: System Environment/Kernel -URL: http://madwifi.org -#Source0: http://snapshots.madwifi.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz +URL: http://madwifi-project.org +#Source0: http://snapshots.madwifi-project.org/%{name}-%{branch}-r%{revision}-%{snapshot}.tar.gz # Changes accordingly to the new rule : madwifi-ng-r<revision>-<generation date>.tar.gz -Source0: http://snapshots.madwifi.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz +Source0: http://snapshots.madwifi-project.org/madwifi-ng/%{name}-ng-r%{revision}-%{snapshot}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root Requires: /sbin/depmod Requires: %{name}-module >= %{version} @@ -128,6 +128,9 @@ # %changelog +* Thu May 28 2009 Michael Renzmann <mre...@ma...> +- Update references to project website with new domain + * Wed Dec 14 2005 Patrick Pichon <Pat...@la...> - Update accordingly to the new file name rule: madwifi-ng-r<revision>-<generation date>.tar.gz - 'branch' tag is not use yet. 'ng' is hardcoded as part of the file name Modified: madwifi/branches/madwifi-hal-testing/scripts/make-release.bash =================================================================== --- madwifi/branches/madwifi-hal-testing/scripts/make-release.bash 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/scripts/make-release.bash 2009-05-28 13:42:07 UTC (rev 4030) @@ -49,7 +49,7 @@ check_dir_prereq "RELEASE_TMP" check_dir_prereq "RELEASE_STORE" -# caller must have write access to the madwifi.org repository +# caller must have write access to the madwifi-project.org repository valid=0 repos=$(svn info | grep "Repository Root" | cut -d" " -f3) for f in ~/.subversion/auth/svn.simple/*; do Modified: madwifi/branches/madwifi-hal-testing/tools/man/80211debug.8 =================================================================== --- madwifi/branches/madwifi-hal-testing/tools/man/80211debug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/tools/man/80211debug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -115,7 +115,7 @@ Disable state bitmap for ath0. .PP .SH "SEE ALSO" -\fBathdebug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fBathdebug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-hal-testing/tools/man/athdebug.8 =================================================================== --- madwifi/branches/madwifi-hal-testing/tools/man/athdebug.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/tools/man/athdebug.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -94,7 +94,7 @@ Clear rate bitmap on wifi0. .PP .SH "SEE ALSO" -\fB80211debug\fP(8), \fBhttp://madwifi.org/wiki/DevDocs/AthDebug\fP +\fB80211debug\fP(8), \fBhttp://madwifi-project.org/wiki/DevDocs/AthDebug\fP .SH "AUTHOR" This manual page was written by Kel Modderman <ke...@tp...> and was based upon previous text written by Eric S. Raymond. Modified: madwifi/branches/madwifi-hal-testing/tools/man/wlanconfig.8 =================================================================== --- madwifi/branches/madwifi-hal-testing/tools/man/wlanconfig.8 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/tools/man/wlanconfig.8 2009-05-28 13:42:07 UTC (rev 4030) @@ -127,7 +127,7 @@ .RS 0 \fBifconfig br0 up .RS 7 -\fRCreate a WDS bridge. See http://madwifi.org/ for more information. +\fRCreate a WDS bridge. See http://madwifi-project.org/ for more information. .RS -7 .PP .SH "AUTHOR" Modified: madwifi/branches/madwifi-hal-testing/tools/wpakey.c =================================================================== --- madwifi/branches/madwifi-hal-testing/tools/wpakey.c 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/branches/madwifi-hal-testing/tools/wpakey.c 2009-05-28 13:42:07 UTC (rev 4030) @@ -1,6 +1,6 @@ /** WEP/WPA key setting tool for MadWifi driver, version 0.5 * - * (C) 2008-03-28 Georg Lukas <ge...@ma...> + * (C) 2008-03-28 Georg Lukas <ge...@ma...> * * This program can be used to debug the MadWifi Key Cache. Use with caution * and without warranty! Modified: madwifi/trunk/INSTALL =================================================================== --- madwifi/trunk/INSTALL 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/trunk/INSTALL 2009-05-28 13:42:07 UTC (rev 4030) @@ -181,4 +181,4 @@ file README. In addition, the project's wiki has a lot of valuable information: -http://madwifi.org/ +http://madwifi-project.org/ Modified: madwifi/trunk/README =================================================================== --- madwifi/trunk/README 2009-05-24 06:30:27 UTC (rev 4029) +++ madwifi/trunk/README 2009-05-28 13:42:07 UTC (rev 4030) @@ -64,7 +64,7 @@ you will see messages that your system is now "tainted". A detailed discussion of the pros and cons of this design can be found -at http://madwifi.org/wiki/HAL +at http://madwifi-project.org/wiki/HAL If you wish to use this driver on a platform for which an ath_hal module is not already provided please contact the author. Note that this is @@ -95,7 +95,7 @@ A list of products that have been reported to be supported by MadWifi can be found here: -http://madwifi.org/wiki/Compatibility +http://madwifi-project.org/wiki/Compatibility In general, if a device is identified as ``11a only'', it is almost certain to contain an Atheros 5210 part in it. Most retail a+b products @@ -167,7 +167,7 @@ modprobe ath_pci autocreate=none Please see the following link for more information: -http://madwifi.org/wiki/UserDocs/autocreate +http://madwifi-project.org/wiki/UserDocs/autocreate Virtual APs (VAPs) and wlanconfig @@ -257,7 +257,7 @@ By default the ath0 device is used; to override this use the -i option. A wiki page describes common MadWifi debugging methods here: -http://madwifi.org/wiki/DevDocs/AthDebug +http://madwifi-project.org/wiki/DevDocs/AthDebug Security/Crypto Support @@ -329,7 +329,7 @@ 1. Ad-hoc mode is broken; symptoms are intermittent operation. Other issues might be mentioned in our ticket tracker: -http://madwifi... [truncated message content] |