Re: [Mactel-linux-users] Suspending issues with 2.6.20

[Marvin S. <ma...@de...>]

On Sunday 25 February 2007 00:52, gimli wrote:
> Try to disable this one :
>
> CONFIG_BLK_DEV_PIIX=y

Done.

>
> You cold also try to disable the
> old ATA support complete. And use
> the new libata ATA drivers.

Also done (see attached config).

Now the process stops with following messages:

DISK:
ata_piix 00:1f.2: freeze
ata_piix 00:1f.2: freeze

RAM: 
ACPI: PCI interrupt for device 00:1f.2 disabled.
ata_piix 00:1f.1: suspend

Again I used sysfs to suspend.
Somebody could explain why ata_piix will not suspend?

>
> cu
>
> Edgar (gimli) Hucek
>
> Marvin Stark wrote:
> > Hi guys,
> >
> > I'm currently testing my MacBook2,1 with kernel 2.6.20.
> > Till today I used 2.6.18.5 where suspend to disk (using s2disk) worked
> > without any problems. But now I'm not able to suspend to disk or ram.
> > I'm using debian etch with a full encrypted filesystem.
> >
> > While suspending to ram the process stops with following message:
> > ide-cdrom 0.0: suspend
> >
> > While suspending to disk the process stops with following message:
> > ide-cdrom 0.0: freeze
> >
> > I used sysfs to change the status.
> >
> > Is there anything missing or wrong configured in my kernel?
> >
> > I attached lsmod and my kernel config.
> >

[...]

Regards,
-- 
 .""`.     Marvin Stark <ma...@de...>
: :"  :    Homepage: www.der-marv.de
`. `"`
  `-  Debian - when you have better things to do than fix a system