Re: [Ltsp-discuss] workstation boot problem

[<jam@McQuil.Com>]

James,

Any change it could be your /etc/hosts.allow file ?  Make sure it
has the correct network address in there.

Also, could iptables or ipchains be getting in your way ?

Just a thought,

Jim McQuillan
ja...@lt...



On 10 Aug 2002, James Van't Slot wrote:

> Hey all,
> I hope you can help, I've exhausted my arsenal of knowledge on this one
> (small as it is).
> 
> I'm running RedHat 7.3 on the ltsp server (192.168.5.12) and have
> installed ltsp from tarballs:
> 	
> 	ltsp_core-3.0.5-i386.tgz   
> 	ltsp_kernel-3.0.4-i386.tgz 
> 	ltsp_x_core-3.0.1-i386.tgz
> 	ltsp_x_fonts-3.0.0-i386.tgz
> 
> before running the install.sh on ltsp_core I modified the config file to
> suite my network ie: 192.168.5.0
> 
> I have followed all of the instructions to the letter listed in the
> Documents page on the ltsp.org website including the troubleshooting
> section.
> 
> When the workstation boots up, I get as far as the following lines:
> 
> 
> ..Me: 192.168.5.100, Server: 192.168.5.12, Gateway 192.168.5.1
> Loading 192.168.5.12:/lts/vmlinuz-2.4.18-ltsp-1 ...(NBI)... ......._
> 
> 
> Then it just sits there with a blinking cursor... taunting me.
> 
> I've tried tftp from another machine (192.168.5.10) and can successfully
> connect to 192.168.5.12 and do a:
> 
> 	tftp> get /lts/vmlinuz-2.4.18-ltsp-1
> 	Received 1415027 bytes in 0.5 seconds
> 
> So I assume tftp in working properly.
> 
> I can also manually mount all of the exported filesystems in the
> /etc/exports file from the same machine in the tftp test.
> 
> listing of /etc/exports:
> ## LTS-begin ##
> 
> #
> # The lines between the 'LTS-begin' and the 'LTS-end' were added
> # on: Sat Aug 10 10:10:03 PDT 2002 by the ltsp installation script.
> # For more information, visit the ltsp homepage
> # at http://www.ltsp.org
> #
> 
> /opt/ltsp/i386           192.168.5.0/255.255.255.0(ro,no_root_squash)
> /var/opt/ltsp/swapfiles  192.168.5.0/255.255.255.0(rw,no_root_squash)
> 
> #
> # The following entries need to be uncommented if you want
> # Local App support in ltsp
> #
> #/home                  192.168.5.0/255.255.255.0(rw,no_root_squash)
> 
> ## LTS-end ##
> 
> 
> portmap is running,
> mountd is running,
> nfs is running.
> 
> The workstation is listed in the hosts file on 192.168.5.12 (ltsp
> server).
> 
> I'm stumped.  Anyone got any ideas what might be holding thing up?
> 
> Thanks for your help.
> 
> james
> 
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _____________________________________________________________________
> Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
>       https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help,   try #ltsp channel on irc.openprojects.net
> 

--