From: Allan K. <son...@ii...> - 2006-12-07 15:44:33
|
Okay No other sequencer I can fins seems to have external sync anywhere near as implemented as MusE, so I can't really determine if this is MusE or the driver, unless there is some debuggin in fo I can turn on cheers Allan On Fri, 2006-12-08 at 01:50 +1100, Allan Klinbail wrote: > Thanks, > > This is good to know. I've noticed some odd behaviour with sync after > previous and now this release, which seems to be related to previous > stop point. > > I think I have noticed new sync input issues as well, but it may be alsa > related, as they only seem to occur when I use the mtp-av, but could be > MusE because I've seen similar behaviour before that was fixed by > changing the MIDI clock input port settings, but itsn't occurring now. > > The behaviour I've seen is that when devices that have internal clocks > connect in addition to the external sequencer that MusE skips bars and > misreads time. This is occurring when the other devices are not sending > their own clock signals. > > This is occurring with a > > An MPC-2000xl in master mode > MusE in slave mode > Yamaha AN-200 set in slave mode, > edirol pcr-30 with the clock turned off (it doesn't slave but has a > clock that can be turned on if using as a transport controller) (with > MIDI out connections to the MTP-AV) > MTP-AV using alsa driver > > I was able to get sync in one specific condition, > block sync signals coming out of the an-200 with the MTP-AV and removing > both MIDI cables connecting the edirol to the mtp av. (blocking the > signal with the MTP-AV had no effect on this at all.) > > This only occurs with MusE syncing in and not out. > > I noticed this quirk a while ago without the mtpav involved in the > past. > With the PCR-30's clock off MusE was not keeping sync with the MPC-2000 > until I selected a discrete input for MIDI clock, even though there was > only one device sending a signal. > > I am now going to test to see if I can duplicate this behaviour on > another sequencer to help determine if it is MusE or the driver. > > cheers > > Allan > > > > > > > > On Thu, 2006-12-07 at 08:57 +0100, rj...@sp... wrote: > > Hello Allan, > > > > Allan Klinbail skrev: > > > Hi, > > > > > > In an all hardware setup (synths and controllers are all external > > > devices) I am not getting any shift of the controllers. It all seems to > > > working quite tightly. > > > > > > > Ok, good to know. > > I have been researching this myself and I have not found any issues > > during playback. > > > > Moving the playhead while stopped does however still have issues. > > Moving, deleting and copying parts leaves a trace of controller events > > that are output when the playhead is moved. I'm researching how to fix > > this. > > Restarting MusE should mostly get things on "track" again. > > > > Regards, > > Robert > > > > > > > cheers > > > > > > Allan > > > > > > > > > On Thu, 2006-12-07 at 04:58 +1100, Allan Klinbail wrote: > > > > > >> Speaking of tomorrow .. I'll try on a true hardware synth setup > > >> tomorrow. > > >> > > >> cheers > > >> > > >> Allan > > >> > > >> On Tue, 2006-11-28 at 23:01 +0100, . wrote: > > >> > > >>> On Tuesday 28 November 2006 16:56, rj...@sp... wrote: > > >>> > > >>> > > >>>> Oh, experimental synth? hardware or software? :) > > >>>> > > >>>> > > >>> Softardware :) It's a hybrid digital/analog system using LADSPA oscillators > > >>> from the CAPS suite for the "vco", the modulators (lfo/env) are made with > > >>> PureData then send thru a DIY hispeed digital->CV convertor (32 channels) to > > >>> modulate a bunch of *real* analog VCF and VCA. I have cloned various famous > > >>> VCF (Moog/SEM/KorgMS20/Synthacon). :)) > > >>> > > >>> Then all this is aquired by a Terratec EW88mt using ardour and MusE. > > >>> > > >>> > > >>>>> But i think this report may interest u :) > > >>>>> > > >>>> Yes it does. > > >>>> The change you mention below is I think the only change made that could > > >>>> affect this... not entirely sure what is going on. If you have more info > > >>>> please send it. > > >>>> > > >>>> > > >>> I will, i observed a curious behaviour like each time the loop started again > > >>> it changed the value of a midi controller :) > > >>> > > >>> Now, it seems to work ok but all the "controller" parts have been moved to bar > > >>> 2. Tomorrow will be another day :) > > >>> > > >>> Cheers, > > >>> > > >>> NR > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> > > >>> ------------------------------------------------------------------------- > > >>> Take Surveys. Earn Cash. Influence the Future of IT > > >>> Join SourceForge.net's Techsay panel and you'll get the chance to share your > > >>> opinions on IT & business topics through brief surveys - and earn cash > > >>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > >>> _______________________________________________ > > >>> Lmuse-user mailing list > > >>> Lmu...@li... > > >>> https://lists.sourceforge.net/lists/listinfo/lmuse-user > > >>> > > >> ------------------------------------------------------------------------- > > >> Take Surveys. Earn Cash. Influence the Future of IT > > >> Join SourceForge.net's Techsay panel and you'll get the chance to share your > > >> opinions on IT & business topics through brief surveys - and earn cash > > >> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > >> _______________________________________________ > > >> Lmuse-user mailing list > > >> Lmu...@li... > > >> https://lists.sourceforge.net/lists/listinfo/lmuse-user > > >> > > > > > > ------------------------------------------------------------------------- > > > Take Surveys. Earn Cash. Influence the Future of IT > > > Join SourceForge.net's Techsay panel and you'll get the chance to share your > > > opinions on IT & business topics through brief surveys - and earn cash > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > _______________________________________________ > > > Lmuse-user mailing list > > > Lmu...@li... > > > https://lists.sourceforge.net/lists/listinfo/lmuse-user > > > > > > > > > ------------------------------------------------------------------------- > > Take Surveys. Earn Cash. Influence the Future of IT > > Join SourceForge.net's Techsay panel and you'll get the chance to share your > > opinions on IT & business topics through brief surveys - and earn cash > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > _______________________________________________ > > Lmuse-user mailing list > > Lmu...@li... > > https://lists.sourceforge.net/lists/listinfo/lmuse-user > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Lmuse-user mailing list > Lmu...@li... > https://lists.sourceforge.net/lists/listinfo/lmuse-user |