Re: [Lmuse-user] Distortion effect for a MIDI bass track?

[Jens R. <pli...@ya...>]

Hi Andrew,

I am sorry, but I do not understand what you mean. Why two stereo 
outputs for Fluidsynth?

To try to understand what you mean I first set up my first test song with 
a simple drums instance. Had to look for free drum samples on the 
Internet, found one set of drum samples. 

Then I looked at my simple drums test song. I have an Out 1 track, a 
simple drums track and a drum Midi track which is connected to the 
simple drum track. 

When I click the simple drum track I see a stereo volume meter to the 
left, two volume signals are shown there. I can hear the drums. Are 
these channels channel 0 + 1?

How do I activate and hear channel 1 + 2? By changing that switch in the 
SimpleDrums configuration windows from "Mix" to "Chn" for every drum 
channel? If I change these settings to "Chn", then I do not hear any 
drum sound. 

What do I need to do to be able to listen to drum sound if these 
settings are set to "Chn" in the SimpleDrums configuration window?

Regards,

Jens

Am Donnerstag, 24. September 2015 schrieb Andrew Deryabin:
> Hi,
> 
> By the way - now fluidsynth in muse has only one stereo output. I can
> make separate stereo outputs for every channel if Jens will test this
> 
> :). It will be like simpledrums - 0+1 for mixed output (1-16
> :channels)
> 
> to not break old songs and 1+2 etc for channels 1..16.
> 
> 24.09.2015 19:20, Jens Radloff пишет:
> > Hi Robert,
> > 
> > Thank you for your support.
> > 
> >> The midi track uses a synth to make it's bass sound, right?
> >> Perhaps a fluidsynth?
> > 
> > Yes, that's correct, a fluidsynth. This fluidsynth served for all
> > instruments in my song (drums, bass, piano). So I had to do the
> > following:
> > 
> > I created a 2nd fluidsynth track, connected it to the bass MIDI
> > track, and put a distortion effect on the fluidsynth track. I
> > decided to use the LADSPA guitarix_distortion effect, it has the
> > best possibilities to define distortion, and the best distortion
> > results.
> > 
> > Regards,
> > 
> > Jens
> > 
> > Am Donnerstag, 24. September 2015 schrieb Robert Jonsson:
> >> Hi Jens,
> >> 
> >> 2015-09-24 8:04 GMT+02:00 Jens Radloff <pli...@ya...>:
> >>> Hi,
> >>> 
> >>> I have a song with an undistorted MIDI bass track. I would like
> >>> to distort that bass track. I checked all available effects in
> >>> MusE, but I cannot find a distortion effect that can be applied
> >>> to an individual MIDI track.
> >>> 
> >>> Is there such an effect available in MusE? A nice distortion
> >>> effect for a bass, defined as a MIDI track?
> >> 
> >> The midi track uses a synth to make it's bass sound, right?
> >> Perhaps a fluidsynth?
> >> The dist effect should be added to the audio source, which in this
> >> case hopefully is a plugin.
> >> Find the rack for the synth and put a dist effect there. There
> >> should be plenty of distortions if you have installed from a
> >> common distribution.
> >> 
> >> I can explain in more detail if you like but no time now, just
> >> thought I would push you in the right direction :)
> >> 
> >> Regards,
> >> Robert
> > 
> > -------------------------------------------------------------------
> > ----------- Monitor Your Dynamic Infrastructure at Any Scale With
> > Datadog! Get real-time metrics from all of your servers, apps and
> > tools in one place.
> > SourceForge users - Click here to start your Free Trial of Datadog
> > now!
> > http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> > _______________________________________________
> > Lmuse-user mailing list
> > Lmu...@li...
> > https://lists.sourceforge.net/lists/listinfo/lmuse-user