From: Rizsanyi Z. <riz...@my...> - 2002-11-06 15:58:24
|
On Tuesday 05 November 2002 16:05, Leandro Lucarella wrote: > Christoph Bartelmus, el lunes 4 de noviembre a las 21:18 me escribiste: > > Hi! > > > > Leandro Lucarella "lu...@ll..." wrote: > > > > [...] > > > > > Hi! I've been testing the Leadtek WinView 601TV support and it works > > > preety good :) > > > The only problem I found is that you can't press a button twice. I > > > press button A and works, press it again and doesn't works. I press > > > other button, B, and works fine, then press A again and works again. I > > > don't know if I'm clear with the explanation. > > > If I use irw, I get: > > > [I press button "3" but I don't hold it down!] > > > 00000000c03fe01f 00 3 RM-0007 > > > 00000000c03fe01f 01 3 RM-0007 > > > 00000000c03fe01f 02 3 RM-0007 > > > > The gpio_lock_mask value for the BTTV_WINVIEW_601 probably is wrong. Try > > to find the correct value. I'd first try 0x100 as for the Winfast cards > > and set sample_rate to 0 to use interrupts. > > Ok, sith sample_rate=0 it worked! With gpio_lock_mask=0x100 it worked > just about half buttons. > So with this line is how it worked better: > {BTTV_WINVIEW_601, 0, 0x00001f00, 0, 0x0004000, 0, 0, 0, 32}, > > Problems I found: > 1) I can't remove the kernel module, when I put rmmod lirc_gpio it keeps > waiting forever (lsmod says '... lirc_gpio (deleted)'). > 2) The only buttons that can repeat are CH_UP, CH_DOWN, VOL_UP and > VOL_DOWN. This is because a wrong gpio_lock_mask or sample_rate? > 3) lircmd's BUTTON4_xxx and BUTTON5_xxx doesn't works. To scroll I use > MOVE_IN and MOVE_OUT (maybe this is the standard way but I didn't see > it in the documentation). > > Well, finally I want to know if there's any way to fix problem 2 (I know > there are some win32 programs to see gpio stuff but I never use them, > and I don't really know what gpio is so a little help would be nice :). AFAIK problem 2 comes from hardware. That is the remote control is designed in the way that only those few keys repeat. Regards Zsolt |