From: <hu...@in...> - 2001-04-20 21:31:53
|
Hi there, I'm just managed to get mit selfmade ir-receiver work with lirc. Now I have another problem. I want to use a Loewe TV remote, which has two additional modes for VCR & DVD. I can teach TV & DVD mode with irrecord with no problems. With VCR mode irrecord gives this: Press RETURN now to start recording. ................................................................................ Found const length: 114919 Please keep on pressing buttons like described above. ................................................................................ RC-6 remote control found. No header found. No repeat code found. Signals are biphase encoded. Signal length is 27 Checking for toggle bit. Please press an arbitrary button repeatedly as fast as possible (don't hold it down!). 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The lines with 0 are the output from just one single button press. If I keep pressing the button I get more 0's, but I can't get out of the loop (even tried for 10 minutes). If I stop pressing, irrecord abborts and I get: irrecord: no data for 10 secs, aborting No toggle bit found. But I know for sure that RC6 has a toggle bit! What is going wrong? Yes, I can get it working in raw mode, but for some reason repeating when holding a button doesn't works. Not good. Any hints welcome. TIA. Bye. -- Stefan Huelswitt | http://home.pages.de/~nathan hu...@in... | IRC: nathan @ #nrw.de |