From: Wolfgang S. <sc...@hl...> - 2013-06-05 17:32:41
|
Hallo Bengt. ----- Original Message ----- > From: "Bengt Martensson" <bu...@be...> > > Is it possible, to disable the carrier, so the commands are > > being sent as nice "logic-level" commands? > to my knowledge, this (non-modulated IR signals) is not supported by > Lirc. I looked at the Raspberry Pi driver ("Aron") a few months ago > (this is developed from the serial driver), and was able to modify it to > accomplish it, by allowing the frequency parameter to be set to 0, and Yes, I ran into that parameter already. But a simple try with frequency = 0 failed ... naive I now. ;-) ... currently I'm using a workaround with some further hardware connected to the irout_pin of the Raspberry Pi. > handling this case accordingly. I intend to publish my modifications > (actually some more features too, like allowing up to 8 transmitters). > Let me know if you (or anyone else) wants it. My next step would be, to enable frequency = 0 in the source and try to fix what fails then. But if you did that already, it would be very nice, if you could share your modifications? Thank you very much for your help! Best regards, Wolfgang |